)]}'
{
  "log": [
    {
      "commit": "435516229e5f511d1ac4498da58372c8fece35b7",
      "tree": "e510804ebf5b8f1786a7c377e1cef9fb5bb11d90",
      "parents": [
        "e5ed5bafc97e65e8d2b60ddaca48754a50ca5692"
      ],
      "author": {
        "name": "Martin Stjernholm",
        "email": "mast@google.com",
        "time": "Fri Nov 09 15:14:54 2018 +0000"
      },
      "committer": {
        "name": "Martin Stjernholm",
        "email": "mast@google.com",
        "time": "Tue Nov 13 15:15:37 2018 +0000"
      },
      "message": "Revert^2 \"Link lzma and lz4 compression libs statically into libartbase and use that\"\n\nThis reverts commit 9960cbc0ff98978a9b32f14ae77d8ddb3c6908d9.\n\nReason for revert: This is the same as aosp/815019 except version_script is\nexcluded on Darwin. I think it should pass the mac targets, but haven\u0027t\ntested.\n\nTest: art/tools/buildbot-build.sh {--host,--target}\nTest: art/test/testrunner/run_build_test_target.py art-asan (not on Darwin)\nTest: python frameworks/rs/build_rs.py (on Darwin, thanks Orion!)\nBug: 118374951\nChange-Id: I7a362381f6d891c6dc1304e5fcf6f8851aa67d7c\n"
    },
    {
      "commit": "9960cbc0ff98978a9b32f14ae77d8ddb3c6908d9",
      "tree": "46602632efd61e7d1330f52e4ec0c7404ae9bad0",
      "parents": [
        "21579bec04bea8a9a6ca65ad5493016d1fcb9dcc"
      ],
      "author": {
        "name": "Annie Meng",
        "email": "anniemeng@google.com",
        "time": "Thu Nov 08 11:44:19 2018 +0000"
      },
      "committer": {
        "name": "Annie Meng",
        "email": "anniemeng@google.com",
        "time": "Thu Nov 08 11:44:19 2018 +0000"
      },
      "message": "Revert \"Link lzma and lz4 compression libs statically into libartbase and use that\"\n\nThis reverts commit 21579bec04bea8a9a6ca65ad5493016d1fcb9dcc.\n\nReason for revert: Build failure\n\nChange-Id: Ia941425b9462f478be78058b3d63a30106421de6\n"
    },
    {
      "commit": "21579bec04bea8a9a6ca65ad5493016d1fcb9dcc",
      "tree": "b33204570077025d4af6d2cb82dc8fa84e67b0b9",
      "parents": [
        "bf983214f7488a7923788356d1a441f518073b23"
      ],
      "author": {
        "name": "Martin Stjernholm",
        "email": "mast@google.com",
        "time": "Tue Nov 06 13:56:50 2018 +0000"
      },
      "committer": {
        "name": "Martin Stjernholm",
        "email": "mast@google.com",
        "time": "Wed Nov 07 20:44:24 2018 +0000"
      },
      "message": "Link lzma and lz4 compression libs statically into libartbase and use that\ninstead.\n\nAll targets using these compression libs already use libartbase. This grows\nlibartbase VM size by 240K (219%) on 64 bit, but only these targets pack on\nextra bloat: dexanalyze, dexdump2, dexlayout(d), dexlist.\n\nTest: art/tools/buildbot-build.sh {--host,--target}\nTest: art/test/testrunner/run_build_test_target.py art-asan\nBug: 118374951\nChange-Id: I16d67d99897ec0a35e1467ab561bb82ee2449983\n"
    },
    {
      "commit": "123333a65e8d2593232c20c6933b60fbb7737ddd",
      "tree": "0714a05eea12a18f0267875d02e4e5aa7c24227a",
      "parents": [
        "eead626e0567d11ed0402e9586a99ca4a1d023eb"
      ],
      "author": {
        "name": "Martin Stjernholm",
        "email": "mast@google.com",
        "time": "Tue Oct 30 14:19:58 2018 +0000"
      },
      "committer": {
        "name": "Martin Stjernholm",
        "email": "mast@google.com",
        "time": "Tue Oct 30 16:03:04 2018 +0000"
      },
      "message": "Remove dependencies on libutils.\n\nThe libutils dependency of libziparchive was removed in aosp/796795.\n\nTest: art/test.py --host --64 --optimizing\nTest: env ART_TEST_NO_SYNC\u003dtrue make -j4 test-art-target-gtest\nTest: art/test/testrunner/testrunner.py -j4 --target --64 --optimizing\nTest: art/test/testrunner/run_build_test_target.py art-asan (build only)\nBug: 118374951\nChange-Id: I58cdf7a39558c87e48bdc1274d6c6ddd36301d8d\n"
    },
    {
      "commit": "65ed42a3d3a7bf1a42e759ed53c16b179f54813a",
      "tree": "77930ed648604f50fe6a46059f4cc659b443ddb7",
      "parents": [
        "8a94003e66f337fe84870ff68d3f6f234555cf06"
      ],
      "author": {
        "name": "Nicolas Geoffray",
        "email": "ngeoffray@google.com",
        "time": "Tue Oct 30 12:33:04 2018 +0000"
      },
      "committer": {
        "name": "Nicolas Geoffray",
        "email": "ngeoffray@google.com",
        "time": "Tue Oct 30 12:33:04 2018 +0000"
      },
      "message": "Revert \"Link compression libs statically into libartbase and use those everywhere.\"\n\nThis reverts commit 8a94003e66f337fe84870ff68d3f6f234555cf06.\n\nReason for revert: Breaks asan and dex2oats.\n\nChange-Id: Idea760bbd2b25078ecd1ee5a39da94f6b74432a7\nbug: 118374951\n"
    },
    {
      "commit": "8a94003e66f337fe84870ff68d3f6f234555cf06",
      "tree": "0271729b2571c969238786d21a45ce05120b96e0",
      "parents": [
        "ce2a00daa92670a4fc01ef59fdbc3769a846f69c"
      ],
      "author": {
        "name": "Martin Stjernholm",
        "email": "mast@google.com",
        "time": "Wed Oct 24 15:02:55 2018 +0100"
      },
      "committer": {
        "name": "Martin Stjernholm",
        "email": "mast@google.com",
        "time": "Mon Oct 29 21:20:43 2018 +0000"
      },
      "message": "Link compression libs statically into libartbase and use those everywhere.\n\nAll targets using these compression libs already use libartbase. This grows\nlibartbase VM size by 314K on 64 bit, but only these targets pack on the\nextra the bloat of liblz4 (84K) and liblzma (174K): dexanalyze, dexdump2,\ndexlayout(d), dexlist. libbacktrace and libunwindstack gain liblz4 only.\n\nOn the other hand this gets rid of static instances in several shared libs.\n\nTest: mmma art\nTest: art/test.py --host --64 --optimizing\nTest: env ART_TEST_NO_SYNC\u003dtrue make -j4 test-art-target-gtest\nTest: art/test/testrunner/testrunner.py -j4 --target --64 --optimizing\nBug: 118374951\nChange-Id: Ida103546d2d16ef892d09e9ca3a0ae5e3b42a541\n"
    },
    {
      "commit": "c2efd4da88c1eeeb51af1ebc4a1321918c3243e5",
      "tree": "211521ea526432bb4da3c5f83efafae1d3f1ec27",
      "parents": [
        "f4fd65e393fe60f17e22ee7823f8dce4594c053d"
      ],
      "author": {
        "name": "Elliott Hughes",
        "email": "enh@google.com",
        "time": "Thu Oct 25 13:14:55 2018 -0700"
      },
      "committer": {
        "name": "Elliott Hughes",
        "email": "enh@google.com",
        "time": "Thu Oct 25 13:15:33 2018 -0700"
      },
      "message": "Remove libcutils socket_peer_is_trusted dependency.\n\nART is the only caller of this code, and it\u0027s trivially rewritten to\njust use NDK API.\n\nBug: N/A\nTest: boots\nChange-Id: I679a0f7e7ba48c6660c69629af180f04c4532c62\n"
    },
    {
      "commit": "563ada2e5570d947ee2b96e3651ded3692be33be",
      "tree": "649679d2e1249053a98237130a9b944181aa21ef",
      "parents": [
        "a93364cbd4ebf4b8c309c4c18f30e16c8f9a8997"
      ],
      "author": {
        "name": "Orion Hodson",
        "email": "oth@google.com",
        "time": "Tue Sep 04 11:28:31 2018 +0100"
      },
      "committer": {
        "name": "Orion Hodson",
        "email": "oth@google.com",
        "time": "Wed Sep 19 16:58:49 2018 +0100"
      },
      "message": "ART: Add wrappers for membarrier and memfd_create()\n\nAdds art::membarrer() and art::memfd_create() as wrappers around the\nsimilarly named linux syscalls. These wrappers can fail due to missing\nOS support so code that uses them needs to deal with this.\n\nUpdates the JIT code cache to use art::membarrer().\n\nBug: 111199492\nTest: art/test.py --host\nChange-Id: I122746e6293e7201077e834d8a5ed7bbba45e283\n"
    },
    {
      "commit": "ec5ed06b59a3b85e7f98ffc50e0539e5a77d1ba1",
      "tree": "c09b7debef2c19d2ea79488d9d3357b49020da26",
      "parents": [
        "9c568f10f68cdbeb285e41cb4538c06f5e90c1b2"
      ],
      "author": {
        "name": "Andreas Gampe",
        "email": "agampe@google.com",
        "time": "Fri Jan 26 16:20:02 2018 -0800"
      },
      "committer": {
        "name": "Andreas Gampe",
        "email": "agampe@google.com",
        "time": "Thu Sep 06 14:00:25 2018 -0700"
      },
      "message": "ART: Refactor static include list\n\nCreate default objects. This allows chaining the sets, and also\ncan separate between host and target.\n\nTest: mmma art\nChange-Id: I68a80068d442b20c6430e9e576df7f74375e7e49\n"
    },
    {
      "commit": "882ed6bcccf60e55b61aa1860d9a15a7e92af959",
      "tree": "98df8864025233a5ab2de61e27789308aadd969d",
      "parents": [
        "2b40dd35c65ad644d448611750f5b577e97594a1"
      ],
      "author": {
        "name": "Steve Austin",
        "email": "steveaustin@google.com",
        "time": "Fri Jun 08 11:40:38 2018 -0700"
      },
      "committer": {
        "name": "Steve Austin",
        "email": "steveaustin@google.com",
        "time": "Thu Jun 21 16:22:12 2018 -0700"
      },
      "message": "Add low_4gb MemMap and remove ashmem support for Fuchsia\n\nTest: Tested with Fuchsia build system go/fuchsia-android\nChange-Id: I61b09614d6f4d24bf9c975baa1f34c6b5735ca3d\n"
    },
    {
      "commit": "052f8ca1776ed7deb4f036498edd69eb6a1b942f",
      "tree": "ae993f1a634b258e124df12663a1d24859917b05",
      "parents": [
        "1c515f0b9d621869a2e67ce5e0f5532d0f2f323a"
      ],
      "author": {
        "name": "David Srbecky",
        "email": "dsrbecky@google.com",
        "time": "Thu Apr 26 15:42:54 2018 +0100"
      },
      "committer": {
        "name": "David Srbecky",
        "email": "dsrbecky@google.com",
        "time": "Mon May 21 20:28:41 2018 +0100"
      },
      "message": "Rewrite stackmap encoding code.\n\nRemove most of the code related to handling of bit encodings.\nThe design is still same; the encodings are just more implicit.\nMost of the complexity is replaced with a single BitTable class,\nwhich is a generic purpose table of tightly bit-packed integers.\nIt has its own header which stores the bit-encoding of columns,\nand that removes the need to handle the encodings explicitly.\n\nOther classes, like StackMap, are accessors into the BitTable,\nwith named getter methods for the individual columns.\n\nThis CL saves ~1% of .oat file size (~4% of stackmap size).\n\nTest: test-art-host-gtest\nChange-Id: I7e92683753b0cc376300e3b23d892feac3670890\n"
    },
    {
      "commit": "68fefacc54b9d918a5b17b99ac7e72421d1b1f94",
      "tree": "39cccda109a63153ca363e592b5570b46e6dece9",
      "parents": [
        "b2683cb0ae69c9a8a0ba654f50fa743a9117171c"
      ],
      "author": {
        "name": "David Srbecky",
        "email": "dsrbecky@google.com",
        "time": "Thu May 10 17:49:33 2018 +0100"
      },
      "committer": {
        "name": "David Srbecky",
        "email": "dsrbecky@google.com",
        "time": "Mon May 21 09:28:22 2018 +0000"
      },
      "message": "Move and rewrite bit loading/storing methods.\n\nMove bit loading/storing methods to BitMemoryRegion and rewrite them.\n\nEnforce natural alignment of the data pointer in BitMemoryRegion.\nThis probably would not be reasonable in MemoryRegion, but it is\nfine here since the BitMemoryRegion already has extra bit offset.\nThe alignment makes it possible to simplify and optimize the methods.\n\nThis makes the stackmap reading code 33% faster.\n(measured by the time needed to verify all stackmap fields on ARM).\n\nTest: m -j40 test-art-host-gtest\nChange-Id: I00be8052969a6056b262df4cd2066ffd86043196\n"
    },
    {
      "commit": "933d6e72ed48d1e5521cd8307678e604a7541622",
      "tree": "7057a24c9ebe51d3af43c4e6b4154d85e3039cc1",
      "parents": [
        "04d81ff75ae339c082b1ecbea38ba34f873059cb",
        "c3e1895e7443c61b77f5c51cd2d18819cade57c1"
      ],
      "author": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Mon May 14 22:26:33 2018 +0000"
      },
      "committer": {
        "name": "Gerrit Code Review",
        "email": "noreply-gerritcodereview@google.com",
        "time": "Mon May 14 22:26:33 2018 +0000"
      },
      "message": "Merge \"Prepare to move ArtDexFileLoader to libdexfile\""
    },
    {
      "commit": "c3e1895e7443c61b77f5c51cd2d18819cade57c1",
      "tree": "bc2705ee47091e37d683cafa020f53190708b089",
      "parents": [
        "6623bc389c43efc87668ce7465e19b195e765e22"
      ],
      "author": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Fri May 11 16:59:31 2018 -0700"
      },
      "committer": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Fri May 11 17:40:56 2018 -0700"
      },
      "message": "Prepare to move ArtDexFileLoader to libdexfile\n\nMove file_utils and friends to libartbase so that ArtDexFileLoader can\nbe moved to libdexfile.  This will clean up duplication and complexity\nwith zip file handling.\n\nBug: 78652467\nTest: make -j 40 test-art-host-gtest\nChange-Id: Ia5eac1f93caf3fa918b4b48803cbfd842035e29e\n"
    },
    {
      "commit": "2300b2d45aba525a163688e5e8faa7448dbfcaef",
      "tree": "734e02b52a162b28f17e637320ffa08a555a8115",
      "parents": [
        "42805fa0afeefbc4fd4e3339940582bdda9c77bd"
      ],
      "author": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Thu May 10 14:20:10 2018 -0700"
      },
      "committer": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Fri May 11 16:48:36 2018 -0700"
      },
      "message": "Remove MemMap dependency on libbacktrace\n\nRemove the dependency on BacktraceMap/libbacktrace for MemMap.\nThe removed code was entirely debug, but we may want to add back\nsome of it to facilitate test debugging.\n\nThis removes the dependency from libartbase on libbacktrace and\nmakes it possible to use libartbase from libdexflie without\ncausing a cyclic dependency.  This facilitates moving\nArtDexFileLoader and some other code into libartbase, and gets\nrid of some debt accumulated during all these refactorings.\n\nBug: 78652467\nTest: make -j 50 checkbuild\nChange-Id: Ic575a764817ba660b851f7d5b5c60e43f8356fea\n"
    },
    {
      "commit": "d5f8de8bc61160bb2cecdcc0f5aa54d151b6176a",
      "tree": "efecd6d3dffd3a1d768b87a111d9e60335d9108c",
      "parents": [
        "9417b6b81393253a56b1b9bb4c7d8a2a2966707e"
      ],
      "author": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Fri Apr 27 14:12:03 2018 -0700"
      },
      "committer": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Tue May 01 16:23:42 2018 -0700"
      },
      "message": "Add CommonArtTest\n\nAdd a test framework that does not start up a Runtime object.\n\nBug: 78651010\nTest: make -j 40 test-art-host\nChange-Id: I6c8af384af5fe1289c6cf137635e94934ac3795d\n"
    },
    {
      "commit": "74b9994598f497ee3c6a72bbacad9926527f67f5",
      "tree": "b876a06735c5e729da62a42e3aa5bd4d79a6ff32",
      "parents": [
        "8a78f81a16a7c8225b48bf634b67f5697f72e15f",
        "79e2607ab50163bfdc283f4a49decec26a216df5"
      ],
      "author": {
        "name": "Treehugger Robot",
        "email": "treehugger-gerrit@google.com",
        "time": "Fri Apr 13 17:02:21 2018 +0000"
      },
      "committer": {
        "name": "Gerrit Code Review",
        "email": "noreply-gerritcodereview@google.com",
        "time": "Fri Apr 13 17:02:21 2018 +0000"
      },
      "message": "Merge \"Move profile dependent modules to libartbase\""
    },
    {
      "commit": "79e2607ab50163bfdc283f4a49decec26a216df5",
      "tree": "0cdb2c65412b64a55ddf1a486ab3d961a0301a3e",
      "parents": [
        "b4b91460b2d01d36ddcb7d55111ccd8faf390c2a"
      ],
      "author": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Fri Apr 06 17:58:50 2018 -0700"
      },
      "committer": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Fri Apr 13 08:29:30 2018 -0700"
      },
      "message": "Move profile dependent modules to libartbase\n\nMove mem_map and zip_archive to libartbase.  This should be the last two\nremaining modules that profile_compilation_info is dependent upon.\n\nBug: 22322814\nTest: make -j 50 checkbuild\n      make and boot a device\n\nChange-Id: I136ee23e426aa8ec7441e3d3f1978f1bebf4b562\n"
    },
    {
      "commit": "9c4a015cf01989597fd899011dba310b704dacaa",
      "tree": "17101dd177beb28c1d28c8eddab645bc7d1af984",
      "parents": [
        "6485701497edf2fd4e5296c3715929ad44ea9752"
      ],
      "author": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Thu Apr 05 12:23:54 2018 -0700"
      },
      "committer": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Mon Apr 09 23:30:08 2018 +0000"
      },
      "message": "Move more runtime code to libartbase, libdexfile\n\nMove some code that logically belongs to libartbase or libdexfile to\nthose places respectively.\n\nBug: 22322814\nTest: make -j 50 checkbuild\nChange-Id: Idfded5d24b40d8587011681e6235b6672846da19\n"
    },
    {
      "commit": "1ce2b3b76d121a765212d69399241843951973ae",
      "tree": "6f2bb0191c869e79891df3151d6faba3a297b9a8",
      "parents": [
        "281c99864f635ef4fd005dba4ba0c750cb9a6143"
      ],
      "author": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Thu Apr 05 11:02:03 2018 -0700"
      },
      "committer": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Thu Apr 05 11:07:59 2018 -0700"
      },
      "message": "Move remaining runtime/base stuff to libartbase\n\nMove the remainder of the Arena stuff, plus dumpable and\nruntime/*memory_region* to libartbase.  More preparation to build\nprofiling library.\n\nBug: 22322814\nTest: make -j 50 checkbuild\nChange-Id: Iaf26d310c89bc58846553281576c18102f5e4122\n"
    },
    {
      "commit": "c431b9dc4b23cc950eb313695258df5d89f53b22",
      "tree": "422273559c3ae52caff0c6b1cf1a62a8312f0e26",
      "parents": [
        "f46f46cf5bd32788d5252b7107628a66594a5e98"
      ],
      "author": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Fri Mar 02 12:01:51 2018 -0800"
      },
      "committer": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Mon Mar 05 13:58:20 2018 -0800"
      },
      "message": "Move most of runtime/base to libartbase/base\n\nEnforce the layering that code in runtime/base should not depend on\nruntime by separating it into libartbase.  Some of the code in\nruntime/base depends on the Runtime class, so it cannot be moved yet.\nAlso, some of the tests depend on CommonRuntimeTest, which itself needs\nto be factored (in a subsequent CL).\n\nBug: 22322814\nTest: make -j 50 checkbuild\n      make -j 50 test-art-host\n\nChange-Id: I8b096c1e2542f829eb456b4b057c71421b77d7e2\n"
    },
    {
      "commit": "67bf42e89592c3a1c648f927f2ce3ccb189a1161",
      "tree": "054d5b7adf7cc62d4d2a2118a70c0fbdd1751610",
      "parents": [
        "d961043ff1dd6fddb68aa90c1f939cfafec24219"
      ],
      "author": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Mon Feb 26 16:43:04 2018 -0800"
      },
      "committer": {
        "name": "David Sehr",
        "email": "sehr@google.com",
        "time": "Wed Feb 28 15:08:21 2018 -0800"
      },
      "message": "Header library to remove dependence on runtime/\n\nAdd a new header library to remove libdexfile and others\u0027 dependence on\nruntime (typically runtime/base) includes in libdexfile.  Also a small step\nto tease dexlayout and profman away from relying on these as well.\n\nBug: 22322814\nTest: make -j 50 checkbuild\n      make -j 50 test-art-host-gtest\n\nChange-Id: I38e2fe399a75f4bc6318c77a71954c00ea73ec2b\n"
    }
  ]
}