)]}' { "log": [ { "commit": "1a225a76ee6bc29833aee048b6cfae20242bdc8b", "tree": "069bfc01d827fcbf9aa4415c4d63d354648f396c", "parents": [ "323844002e54243e295497e7f829e46a533da621" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Fri Jul 05 13:37:42 2019 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Thu Jul 18 13:37:15 2019 +0000" }, "message": "ARM/ARM64: Improve frame entry/exit codegen.\n\nOn ARM64, use STP pre-index for the method and the lowest\nspilled core register for method entry if there\u0027s no gap or\nFP spills in between. On exit, use LDP post-index to restore\nin this case, ignoring the method by loading to XZR. Thus,\nwe save one instruction for both entry end exit for such\nmethods and the performance should be the same or better.\n\nOn ARM, use a single PUSH/POP for method entry and core\nspills if the gap between them is 2 words or less and and we\nhave one or no FP spill, spill args as filler if needed. On\nexit, load the FP spill if any and do a single POP for core\nregisters and return in this situation, clobbering as many\nregisters from r2-r4 as needed; these caller-save registers\nare not used to pass return values. If we cannot do this\nbecause of FP spills but the gap between the method and FP\nspills is 2 words or less, we adjust SP and save the method\nin one PUSH after spilling; there is no similar handling\nfor method exit as the method does not need to be restored.\nThis may improve or degrade performance a bit depending on\nthe particular situation; in the worst case we PUSH/POP\nthree additional registers as a cost for smaller code size.\n\naosp_taimen-userdebug prebuils:\n - before:\n arm/boot*.oat: 19147484\n arm64/boot*.oat: 22558344\n oat/arm/services.odex: 21922256\n - after:\n arm/boot*.oat: 19105436 (-41KiB, -0.2%)\n arm64/boot*.oat: 22549624 (-9KiB, -0.04%)\n oat/arm/services.odex: 21914128 (-8KiB, -0.04%)\n\nTest: aosp_taimen-userdebug boots.\nTest: run-gtests.sh\nTest: testrunner.py --target --optimizing\nBug: 136144107\nChange-Id: Id36c67b4e735418fb18bcd3269b72b25695fbaa2\n" }, { "commit": "b45a435e25d69592f27084a615b351760f040875", "tree": "6920830856dbe3cceb648b365b0d057ea3ea93ec", "parents": [ "5132e0d1433b0962f9609dbbd68427e1fb5a4b9d" ], "author": { "name": "Shalini Salomi Bodapati", "email": "shalini.salomi.bodapati@intel.com", "time": "Wed Jul 10 16:09:41 2019 +0530" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Wed Jul 17 11:12:22 2019 +0000" }, "message": "Add AVX support for packed mul/div instructions.\n\nThis is a follow up for the below patch:\nhttps://android-review.googlesource.com/c/platform/build/+/830841\n\nTest: ./test.py --host --64, test-art-host-gtest\nChange-Id: Id2aa473035556ee230e66addeb69707df8530e75\nSigned-off-by: Shalini Salomi Bodapati \u003cshalini.salomi.bodapati@intel.com\u003e\n" }, { "commit": "3fae12960c2d411dff450fce95c096af0e8d74de", "tree": "5cc26dc33db8f391b3c7ab1fe24546b17f33d389", "parents": [ "b7c640d364d32b79cb52d04750b063667a9a0c86" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Fri Jun 07 11:26:25 2019 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue Jun 11 08:58:34 2019 +0000" }, "message": "Move IntrusiveForwardList\u003c\u003e to libartbase.\n\nIt\u0027s generally useful, not just for the compiler.\n\nTest: m test-art-host-gtest\nChange-Id: I3ca742d93a0bca961d1b8b8209356747d2de08a0\n" }, { "commit": "81d15be76923ec23b86e72bbc2d3a2a6542a325e", "tree": "57bf31c2951cbeebddd72c94a415711423c88f88", "parents": [ "5fd673488c25991ecc85d26c2dc54415773eb407" ], "author": { "name": "Shalini Salomi Bodapati", "email": "shalini.salomi.bodapati@intel.com", "time": "Thu May 30 11:00:42 2019 +0530" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Wed Jun 05 16:06:49 2019 +0000" }, "message": "Add AVX support for packed add/sub instructions on x86\n\nTest: ./test.py --host, test-art-host-gtest\n\nChange-Id: I48d05e6f6befd54657d962119a543b27a8a51d71\nSigned-off-by: Shalini Salomi Bodapati \u003cshalini.salomi.bodapati@intel.com\u003e\n" }, { "commit": "1b3561a157653a3d0f8025ddd65fe6ffeb289a8b", "tree": "f107fe594b9b474f6883de1170314b688e9e209b", "parents": [ "439d12691964780784a67f178384c0175780f665" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Wed May 08 11:50:58 2019 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Wed May 08 13:41:14 2019 +0100" }, "message": "x86: Add assembler tests and clean up style.\n\nThis is a follow-up after\n https://android-review.googlesource.com/923493\n\nTest: m test-art-host-gtest\nChange-Id: Id287815c8ffc001d7cf7a4838c744620a553f662\n" }, { "commit": "20d1c942c0e841920eac92f68c6d3e7f2a2135b4", "tree": "931aed7f4639a4b0a6ab8e3cd7765295a1883be3", "parents": [ "d32f8aadd37aab5b89ffccc86f7d8d07447a213a" ], "author": { "name": "jaishank", "email": "jaishankar.rajendran@intel.com", "time": "Fri Mar 08 15:08:17 2019 +0530" }, "committer": { "name": "Nicolas Geoffray", "email": "ngeoffray@google.com", "time": "Thu Apr 25 09:05:09 2019 +0000" }, "message": "Patch supports Intel(R) AVX/AVX2 MOV Instruction\n\nThis patch enhances the existing ART-Compiler\nto generate Intel(R) AVX/AVX2 MOV Instructions for\ndoing SIMD Operations on Intel(R) Architecture CPUs.\nIt also provides the framework for AVX/AVX2 Instruction\nencoding and dissassembly\n\nBUG: 127881558\nTest: run-test gtest\nChange-Id: I9386aecc134941a2d907f9ec6b2d5522ec5ff8b5\n" }, { "commit": "39402548017c99f9b33afaa851f412371013e911", "tree": "80c4d53cb7ae12ab9f4800cb358e53d5109593da", "parents": [ "2fde9bdc252e209d722f83410f2ced42ab73e8a4" ], "author": { "name": "Yi Kong", "email": "yikong@google.com", "time": "Sun Mar 24 02:47:16 2019 -0700" }, "committer": { "name": "Treehugger Robot", "email": "treehugger-gerrit@google.com", "time": "Fri Mar 29 18:18:00 2019 +0000" }, "message": "Modernise code to use override specifier\n\nGenerated by clang-tidy, with IgnoreDestructors option enabled.\n\nTest: m checkbuild\nBug: 116509795\nChange-Id: I5dafa10c2cf605165581b8cf7dd2633ed101ed65\n" }, { "commit": "2faab0064bccdf06a454ba5fc37f2cfeceab78bc", "tree": "bc51a211068019d77e7739164adf5be5c6333b7b", "parents": [ "5f1465ff689eccbb1b6d15160d1a3700793956da" ], "author": { "name": "David Srbecky", "email": "dsrbecky@google.com", "time": "Tue Feb 12 16:35:48 2019 +0000" }, "committer": { "name": "David Srbecky", "email": "dsrbecky@google.com", "time": "Wed Mar 20 15:20:54 2019 +0000" }, "message": "Create libelffile library for ELF file manipulation.\n\nMove some of our tooling to library to make it reusable.\n\nRemove MIPS support from the ELF builder. This is slightly\neasier than making it independent of the runtime.\n\nBug: 110133331\nTest: test.py -b --host\nChange-Id: I93343808d0e27ee8e1117e713a2503e8179fc245\n" }, { "commit": "3dacdd6343ea9a6471692914c7a9dff66d6453c7", "tree": "5e0a3b8f99e914a7fbd49822e5c8fb1bd4709f5c", "parents": [ "939798e6a565a92e597136c589428e89c28bffd5" ], "author": { "name": "Alex Light", "email": "allight@google.com", "time": "Tue Mar 12 15:45:47 2019 +0000" }, "committer": { "name": "Alex Light", "email": "allight@google.com", "time": "Tue Mar 12 09:52:59 2019 -0700" }, "message": "Revert^4 \"Remove Global deopt requirement for several jvmti events\"\n\nIt was possible for the top frame of a thread to enter the\nartQuickToInterpreterBridge during runtime shutdown. This could be\ncaused by the libjdwp agent. If this happens the caller of the frame\nwill be \u0027null\u0027, which could cause a segv if not detected correctly.\n\nThis reverts commit 939798e6a565a92e597136c589428e89c28bffd5.\n\nReason for revert: Fixed issue that could cause crash during process\n shutdown.\nTest: ./art/tools/run-libjdwp-tests.sh --mode\u003dhost\nTest: ./test.py --host\n\nChange-Id: I2aad1705c761edb4ed788cec4fc8a3068d67aee5\n" }, { "commit": "939798e6a565a92e597136c589428e89c28bffd5", "tree": "3274ff355163df18cd2d7343ce0d34214f9d09c9", "parents": [ "a55e8b5c9827cc4dc4e7f7c7ee07ef1fdafc35e0" ], "author": { "name": "Nicolas Geoffray", "email": "ngeoffray@google.com", "time": "Tue Mar 12 14:26:22 2019 +0000" }, "committer": { "name": "Nicolas Geoffray", "email": "ngeoffray@google.com", "time": "Tue Mar 12 14:26:42 2019 +0000" }, "message": "Revert \"Revert^2 \"Remove Global deopt requirement for several jvmti events\"\"\n\nThis reverts commit a75e5892fba6d0208f33e9ab8e19e732daf94996.\n\nReason for revert: Fails jdwp tests.\n\nChange-Id: Ic883f4f0108b07f1609c6c6a9565eae5903bfd2c\n" }, { "commit": "a75e5892fba6d0208f33e9ab8e19e732daf94996", "tree": "3daff8c3ce1608bacba7358711ccf9bd61c0bb05", "parents": [ "dd83a40a3c4fea0d917577de96742900a61ab548" ], "author": { "name": "Alex Light", "email": "allight@google.com", "time": "Mon Mar 11 15:49:40 2019 +0000" }, "committer": { "name": "Treehugger Robot", "email": "treehugger-gerrit@google.com", "time": "Mon Mar 11 21:59:44 2019 +0000" }, "message": "Revert^2 \"Remove Global deopt requirement for several jvmti events\"\n\nThis reverts commit ad344b6a14feba90a06a205760e9bc766c56cab0.\n\nJit-on-first-use would cause the runtime to skip sending FramePop\nevents for exceptions in some circumstances due to longjmp-ing over\nthe frames. This requires forcing jit off from the first instant a\nthread can get frame popped events, which is unfortunate.\n\nReason for revert: Fixed issue causing 1925 to fail on\n jit-on-first-use and redefine-stress\nTest: ./test.py --host\nTest: ./art/test/testrunner/run_build_test_target.py -j50 art-jit-on-first-use\n\nChange-Id: I6ec2a799db1041262a055be10e1af1faece6f2fc\n" }, { "commit": "ad344b6a14feba90a06a205760e9bc766c56cab0", "tree": "47801fc5b432b0baf544bb8fd522a9fd3b567a7e", "parents": [ "739383c80684eeb41d380ca5d18e1e9a1fe9fd7f" ], "author": { "name": "Nicolas Geoffray", "email": "ngeoffray@google.com", "time": "Sat Mar 09 17:49:52 2019 +0000" }, "committer": { "name": "Nicolas Geoffray", "email": "ngeoffray@google.com", "time": "Sat Mar 09 21:13:15 2019 +0000" }, "message": "Revert \"Remove Global deopt requirement for several jvmti events\"\n\nThis reverts commit 334630ee9dffdd1932c1ee641d938f25362a4c1a.\n\nReason for revert: 1924-frame-pop-toggle fails on some configs.\n\nChange-Id: I5ed3846e0dfff09c67a468f319ff516e14c44e61\n" }, { "commit": "334630ee9dffdd1932c1ee641d938f25362a4c1a", "tree": "81957d634aa76967d97c89014eb69158682b0128", "parents": [ "5b76c16cca1984209e838ada4d79e370d7fda431" ], "author": { "name": "Alex Light", "email": "allight@google.com", "time": "Mon Mar 04 15:08:04 2019 -0800" }, "committer": { "name": "Treehugger Robot", "email": "treehugger-gerrit@google.com", "time": "Fri Mar 08 04:07:45 2019 +0000" }, "message": "Remove Global deopt requirement for several jvmti events\n\nThe JVMTI_EVENT_SINGLE_STEP, JVMTI_EVENT_FIELD_MODIFICATION,\nJVMTI_EVENT_METHOD_EXIT, JVMTI_EVENT_SINGLE_FIELD_ACCESS, and\nJVMTI_EVENT_FRAME_POP events would all deoptimize all threads in all\ncases when enabled. This changes the behavior to instead only\ndeoptimize individual threads when possible. This should make some\ndebugger interactions faster.\n\nTest: ./test.py --host -j72\nTest: ./art/tools/run-libjdwp-tests.sh --mode\u003dhost\n\nChange-Id: I42513cb17fd1144aeb03ca11afd3e3b05e918ce2\n" }, { "commit": "eda46e9cad4271af7188fe0f542cbe88679f4c6e", "tree": "9632daf7b7c0600bd9200da65e43f6640c4cfc27", "parents": [ "feb228244619237d110d8817865d7647f37b9b4f" ], "author": { "name": "David Brazdil", "email": "dbrazdil@google.com", "time": "Mon Feb 18 12:38:19 2019 +0000" }, "committer": { "name": "David Brazdil", "email": "dbrazdil@google.com", "time": "Wed Feb 20 18:32:10 2019 +0000" }, "message": "Fix vdex fast-verify performance regression\n\nRecent CL I0d06b82e31088c58d4493723a5435309740f1d0c generalized the\nfast-verify class redefinition check by checking that all vdex-verified\nclasses resolve to dex files covered by the vdex and are not duplicates\nof classes in parent class loaders. This introduced a performance and\nallocated memory regression for dex2oat invoked with\ncompiler-filter\u003dverify(-profile).\n\nThis patch removes the regression by acquiring a list of classpath dex\nfiles from the compiler driver and boot classpath dex files from the\nclass linker, avoiding class resolution altogether.\n\nA small performance overhead remains as previously only boot classpath\nwas being searched.\n\nTest: run `dex2oat filter\u003dinterpret-only; dex2oat filter\u003dverify`\n compare time and allocated memory numbers before CL and after\nChange-Id: Ifd690cdafdc99d3eafb9847d67775fc11a5b5023\n" }, { "commit": "22e22236cc12c977c01a8d10d4cc0906fc5ead2e", "tree": "1df2e62e339e51b58e682df9a668ff5f3099dfe5", "parents": [ "7909e1e4cc741b38b25328e2f9077beb7ecd018b" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue Feb 05 16:35:01 2019 +0000" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue Feb 05 16:35:01 2019 +0000" }, "message": "ART: Use C++17 extract/modify/insert pattern.\n\nTest: m test-art-host-gtest\nTest: testrunner.py --host --optimizing\nBug: 123750182\nChange-Id: I2721948a566cc11d351324d173b4e1c8e5e54f53\n" }, { "commit": "3db70689e3e1c92344d436a8ea4265046bdef449", "tree": "3db08743e968062ed5bdc143233cdb3c4564696b", "parents": [ "1650dafad62578a1766bd617d78458a4cf1e2a9a" ], "author": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Wed Dec 26 15:12:03 2018 -0800" }, "committer": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Thu Dec 27 12:56:39 2018 -0800" }, "message": "ART: Refactor for bugprone-argument-comment\n\nHandles compiler.\n\nBug: 116054210\nTest: WITH_TIDY\u003d1 mmma art\nChange-Id: I5cdfe73c31ac39144838a2736146b71de037425e\n" }, { "commit": "807e4b30b3384e5b23da0c54710be78f17fc6345", "tree": "cb000ac70bffe89a907e1b63f0b58db3d8b6c4b7", "parents": [ "147b5b1ab58abcc25b4c2b489ee9952d0ce70c69", "26c43778589d1c7598cbe6203b6545c9d3ab220a" ], "author": { "name": "Neil Fuller", "email": "nfuller@google.com", "time": "Tue Dec 04 12:39:16 2018 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Tue Dec 04 12:39:16 2018 +0000" }, "message": "Merge \"Add support for ANDROID_RUNTIME_ROOT variable\"" }, { "commit": "26c43778589d1c7598cbe6203b6545c9d3ab220a", "tree": "474167d306678366b1c90c7a9e6f824308ec7f7a", "parents": [ "c89a28730fb8dff57c6cb5b18295fec45fe85d09" ], "author": { "name": "Neil Fuller", "email": "nfuller@google.com", "time": "Fri Nov 23 17:56:43 2018 +0000" }, "committer": { "name": "Neil Fuller", "email": "nfuller@google.com", "time": "Mon Dec 03 20:05:09 2018 +0000" }, "message": "Add support for ANDROID_RUNTIME_ROOT variable\n\nThis commit introduces the ANDROID_RUNTIME_ROOT environment\nvariable in preparation for its use within the runtime module.\n\nAs a module, ART must no longer use the Android-wide\nANDROID_ROOT environment variable as the base of default\npaths for module content. ANDROID_RUNTIME_ROOT will take over\nthe responsibility. It remains a variable to unify host\nand device treatment.\n\nSome test methods (SetUpAndroidData, TearDownAndroidData\nSetUpAndroidRoot) have been renamed to clarify their purpose.\n\nBug: 119935277\nTest: build / treehugger\nChange-Id: I7c7de52911cbfa56cef90270425ed369176c4767\n" }, { "commit": "aa6f48362b3258a5df5e527987ffe7e068eb4a79", "tree": "0fa8cfbebb77d2e7796084721c836b44114bdc97", "parents": [ "8bda21f1d8bbc1060bf693f5d1666d3396d1cb69" ], "author": { "name": "Artem Serov", "email": "artem.serov@linaro.org", "time": "Wed Nov 21 18:57:54 2018 +0000" }, "committer": { "name": "Artem Serov", "email": "artem.serov@linaro.org", "time": "Mon Dec 03 18:43:48 2018 +0000" }, "message": "ART: ARM64: Pass ISA features to VIXL macroassembler.\n\nVIXL macroassembler should be initialized properly\nto support Armv8.X features in order to emit corresponding\ninstructions.\n\nTest: codegen_test.cc, relative_patcher_arm64_test.\nTest: test-art-host, test-art-target.\nChange-Id: I2f9e155c28b4d2252a3cfb19717f5d25824d5e11\n" }, { "commit": "680cbf205f4560c22d96ed6f3296eb25125d99d6", "tree": "7e455c872744007bb04dcda59221d0288466d986", "parents": [ "23d3ed8c124f239d26a583f9d096b22f7f6677d1" ], "author": { "name": "Alex Light", "email": "allight@google.com", "time": "Wed Oct 31 11:00:19 2018 -0700" }, "committer": { "name": "Alex Light", "email": "allight@google.com", "time": "Tue Nov 06 10:34:35 2018 -0800" }, "message": "Enable building art and tests with linux_bionic\n\nA linux_bionic built runtime can be created by modifying the\n$OUT_DIR/soong/soong.config json file to add a \u0027\"Host_bionic\": true\u0027\nentry and then running the following command:\n\n% m --skip-make $OUT_DIR/soong/host/linux_bionic-x86/\u003ctarget-file\u003e\n\nA script \u0027tools/build_linux_bionic_tests.sh\u0027 was also added that will\nbuild linux-bionic versions of host-test related files.\n\nAlso modify tests so they can be run. Currently all run-tests pass\nwhen run on a linux_bionic host build. All gtests pass except for the\nfollowing 9 tests:\n ArmVIXLAssemblerTest.VixlJniHelpers\n ArmVIXLAssemblerTest.VixlLoadFromOffset\n ArmVIXLAssemblerTest.VixlStoreToOffset\n DwarfTest.DebugFrame\n DwarfTest.DebugFrame64\n DwarfTest.x86_64_RegisterMapping\n DwarfTest.DebugLine\n DwarfTest.DebugLineSpecialOpcodes\n DwarfTest.DebugInfo\n\nSince these tests must be run manually without the standard\n(makefile-based) testrunner it\u0027s not clear yet whether these failures\nare important or what must be done to fix them. Several tests had\ndependencies on the actual location of the libart library that needed\nto be fixed, these tests might as well.\n\nTest: ./tools/build_linux_bionic_tests.sh\nTest: ./test/testrunner/testrunner.py --no-build --host --64 --run-test-option\u003d--bionic\nTest: find $OUT_DIR/soong/host/linux_bionic-x86/nativetest64 -mindepth 2 -type f | while read abc; do $abc; done | tee all-tests.txt\nTest: tail -n +0 -f all-tests.txt | grep FAILED\n\nBug: 31559095\nBug: 118778408\nChange-Id: I5fae4e54371e7410678619f18fcb54a3bd34e9b0\n" }, { "commit": "8e5bc2dc0e70142811ae792c2b56af48c1eb7d4c", "tree": "bd81f98c59fff92129f423be2c48366df71d20ec", "parents": [ "349d1377aa300512177729e7988d824b67638552" ], "author": { "name": "Shalini Salomi Bodapati", "email": "shalini.salomi.bodapati@intel.com", "time": "Wed Oct 24 11:50:56 2018 +0530" }, "committer": { "name": "Shalini Salomi Bodapati", "email": "shalini.salomi.bodapati@intel.com", "time": "Wed Oct 24 20:29:38 2018 +0530" }, "message": "Add support for vex coding scheme in x86 assembler\n\nThis patch adds support to emit VEX prefix which is needed\nto emit instructions namely andn, blsmsk, blsr, blsi\non a cpu that has AVX2.\n\nTest: ./test.py --host --64, test-art-host-gtest\nChange-Id: I6b4902caf8560e4406c5053b142686ed28ba5404\nSigned-off-by: Shalini Salomi Bodapati \u003cshalini.salomi.bodapati@intel.com\u003e\n" }, { "commit": "28f6cff854b61e39f953e69ebf3646ee9826ec82", "tree": "a98e2bf1746d93079b7abe54e278ba87f0aef360", "parents": [ "06ef9aa6a562a3a1f7c1f9b91aadda5018f8ba86" ], "author": { "name": "David Srbecky", "email": "dsrbecky@google.com", "time": "Tue Oct 16 15:07:28 2018 +0100" }, "committer": { "name": "David Srbecky", "email": "dsrbecky@google.com", "time": "Mon Oct 22 14:35:07 2018 +0100" }, "message": "Cache the value of MterpShouldSwitchInterpreters()\n\nAdd field to the Thread object which stores the value instead (negated).\nExplicitly update the field when relevant state changes (which is rare).\n\nThis speeds up golem interpreter benchmarks by 3.5%\non average with some benchmarks up to 15% faster.\n\nTest: test.py -b -r --interpreter --host\nChange-Id: If2df0d3bf9e69ab50c30102b2648e997927c34d8\n" }, { "commit": "fc4b2eaa427e43a51c6f39ffecac0ef4fa732b61", "tree": "b6bc4cd9bc846ae40eac280dbc2c9514e05a0f7b", "parents": [ "26f048f48cdb1e884aab2b6fddf26d58346d29ad", "c55bb390d88b8eb62a50932f7f9b47c2a3733f16" ], "author": { "name": "Treehugger Robot", "email": "treehugger-gerrit@google.com", "time": "Tue Sep 25 00:36:43 2018 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Tue Sep 25 00:36:43 2018 +0000" }, "message": "Merge \"Revert^2 \"ART: Refactor typedef to using\"\"" }, { "commit": "c74d9cbd4c7b1b5b1a4c5a6bb34e9426336bbecc", "tree": "d1030d4bc5fb0986ef9f6e80d81b8a204c011ced", "parents": [ "5ec6f36d4688e70c652882bff8c6a3c060ccc83e" ], "author": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Thu Sep 20 13:44:44 2018 -0700" }, "committer": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Thu Sep 20 20:31:46 2018 -0700" }, "message": "ART: Modernize counting-down loops\n\nPreparation for readability-implicit-bool-conversion.\n\nBug: 32619234\nTest: WITH_TIDY\u003d1 mmma art\nChange-Id: I7a6f9636d5f4537020f99e8cf8560f7f6b6b7ba0\n" }, { "commit": "c55bb390d88b8eb62a50932f7f9b47c2a3733f16", "tree": "ec2e74f3f8404dffcb9bfde4e7ffa3416a35543d", "parents": [ "89468aeaa6a67ae4025b30d427391186306d6522" ], "author": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Fri Sep 21 00:02:02 2018 +0000" }, "committer": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Thu Sep 20 18:37:12 2018 -0700" }, "message": "Revert^2 \"ART: Refactor typedef to using\"\n\nThis reverts commit ee07743e03042c2ca36e0c9513847a9e7d2509f1.\n\nReason for revert: fixed attributes.\n\nBug: 32619234\nTest: m test-art-host\nTest: m test-art-target-gtest-unstarted_runtime_test\nChange-Id: I6f0a775adfdf6ecd132b470f7c5446e949872e20\n" }, { "commit": "ee07743e03042c2ca36e0c9513847a9e7d2509f1", "tree": "66867d7443a3798f6d882ef2715ddeb7baf3e771", "parents": [ "9a20ff06f7ccee08a742c315ec6d351ab56ba1cd" ], "author": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Thu Sep 20 15:05:17 2018 +0000" }, "committer": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Thu Sep 20 15:05:17 2018 +0000" }, "message": "Revert \"ART: Refactor typedef to using\"\n\nThis reverts commit 9a20ff06f7ccee08a742c315ec6d351ab56ba1cd.\n\nReason for revert: Attributes on the wrong side.\n\nBug: 32619234\nChange-Id: I8fd2abef619b22c02ccfbf5ae629339f1a60918b\n" }, { "commit": "9a20ff06f7ccee08a742c315ec6d351ab56ba1cd", "tree": "7e55557e118eb5fffe03ad3456e00d8469a36232", "parents": [ "70dfb6983492aff1c52cc1b52044258aef51f47f" ], "author": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Wed Sep 19 10:58:18 2018 -0700" }, "committer": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Wed Sep 19 21:56:32 2018 -0700" }, "message": "ART: Refactor typedef to using\n\nAdd clang-tidy\u0027s modernize-use-using.\n\nBug: 32619234\nTest: WITH_TIDY\u003d1 mmma art\nChange-Id: If50d37b5152af4270784e3cde7951292a9e19033\n" }, { "commit": "fa6a1b0a1d9d186a0ad9bb413a4e49f1ffd187d8", "tree": "6d3bef945030868d7e78162dc3f4f35a07ce410a", "parents": [ "a0878aa9f4f4102e56a6381b28a8d7c38dec80b9" ], "author": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Fri Sep 07 08:11:55 2018 -0700" }, "committer": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Fri Sep 07 09:13:50 2018 -0700" }, "message": "ART: Continue adding override annotations\n\nUse Clang-tidy\u0027s modernize-use-override to add more annotations. Ignore\ninferred annotations on destructors.\n\nBug: 32619234\nTest: mmma art\nChange-Id: Ic432c928e398d44df9171e42db04ee19946e6887\n" }, { "commit": "625ca4759941299e8a9cc876c985558c4d76bdc0", "tree": "d8085b20c9cc9dd2304e61f40807cd8fb072ca72", "parents": [ "f73cacaae3d8f89327d8886b37792a849cabd9ac" ], "author": { "name": "Roland Levillain", "email": "rpl@google.com", "time": "Fri Aug 24 19:14:16 2018 +0100" }, "committer": { "name": "Roland Levillain", "email": "rpl@google.com", "time": "Tue Aug 28 14:51:00 2018 +0100" }, "message": "Remove \u0027virtual\u0027 and \u0027override\u0027 qualifiers on final methods.\n\nCpplint considers that \u0027virtual\u0027 and \u0027override\u0027 qualifers are\nredundant for methods declared \u0027final\u0027.\n\nTest: mmma art\nChange-Id: If4de1e1fe306f2ee3db9534930b1d24abeaf9fe4\n" }, { "commit": "f73cacaae3d8f89327d8886b37792a849cabd9ac", "tree": "79047e31d512d065db47af7e68fa155c1f638f11", "parents": [ "bbc6e7edb5fca4a61ac53dd9bce79cb4f0bb3403" ], "author": { "name": "Roland Levillain", "email": "rpl@google.com", "time": "Fri Aug 24 17:19:07 2018 +0100" }, "committer": { "name": "Roland Levillain", "email": "rpl@google.com", "time": "Tue Aug 28 11:09:40 2018 +0100" }, "message": "Remove superfluous \u0027virtual\u0027 specifiers in ART.\n\nRemove \u0027virtual\u0027 specifier on methods already bearing the \u0027override\u0027\nspecifier.\n\nTest: mmma art\nChange-Id: I114930969a5ca048d88de9ecd18e2c6403593e31\n" }, { "commit": "bbc6e7edb5fca4a61ac53dd9bce79cb4f0bb3403", "tree": "0fbce767bc383358cf4cd65aafc74140e1850982", "parents": [ "19379b58bd433da91230e4fe6cd96e7416d16adc" ], "author": { "name": "Roland Levillain", "email": "rpl@google.com", "time": "Fri Aug 24 16:58:47 2018 +0100" }, "committer": { "name": "Roland Levillain", "email": "rpl@google.com", "time": "Tue Aug 28 11:06:07 2018 +0100" }, "message": "Use \u0027final\u0027 and \u0027override\u0027 specifiers directly in ART.\n\nRemove all uses of macros \u0027FINAL\u0027 and \u0027OVERRIDE\u0027 and replace them with\n\u0027final\u0027 and \u0027override\u0027 specifiers. Remove all definitions of these\nmacros as well, which were located in these files:\n- libartbase/base/macros.h\n- test/913-heaps/heaps.cc\n- test/ti-agent/ti_macros.h\n\nART is now using C++14; the \u0027final\u0027 and \u0027override\u0027 specifiers have\nbeen introduced in C++11.\n\nTest: mmma art\nChange-Id: I256c7758155a71a2940ef2574925a44076feeebf\n" }, { "commit": "c34bebf39410f5571d3d5813157b61f274d435c3", "tree": "73909d3b34a2908e9de44cc60c4a2ff74eabefd7", "parents": [ "f345404c725330914b8313d2c1af17226c5b92ca" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Thu Aug 16 16:12:49 2018 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue Aug 21 13:51:00 2018 +0100" }, "message": "Remove unnecessary indirection from MemMap.\n\nAvoid plain MemMap pointers being passed around by changing\nthe MemMap to moveable and return MemMap objects by value.\nPreviously we could have a valid zero-size MemMap but this\nis now forbidden.\n\nMemMap::RemapAtEnd() is changed to avoid the explicit call\nto munmap(); mmap() with MAP_FIXED automatically removes\nold mappings for overlapping regions.\n\nTest: m test-art-host-gtest\nTest: testrunner.py --host --optimizing\nTest: Pixel 2 XL boots.\nTest: m test-art-target-gtest\nTest: testrunner.py --target --optimizing\nChange-Id: I12bd453c26a396edc20eb141bfd4dad20923f170\n" }, { "commit": "bd39d145e4986217bcb8dce1d4a9631d926a2781", "tree": "52dfd3307ab5279e960f9a1bf6e474e47440a3d8", "parents": [ "6f4cf6e8fa15de2f9bf7c6a649ea7a2fabef886a" ], "author": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Thu Jul 19 11:14:42 2018 -0700" }, "committer": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Thu Jul 19 11:37:05 2018 -0700" }, "message": "ART: Clean up unused using declarations\n\nMake tidy happy, and enable checking.\n\nTest: mmma art\nChange-Id: I9e18e80b3f37dd2aeb8ecd1c25abe4d5cf2f1c45\n" }, { "commit": "cdfc942e60032622b5a4379d0dd5ca914ba6393a", "tree": "823e767f6eba6fb2831f69753936bc0c35eea84e", "parents": [ "ec1f1a91328f44d93cfc16e39160dbdfce2f7b9a", "f5f56c791c5853f43a2a9781c98d5776c7dd5a59" ], "author": { "name": "Hans Boehm", "email": "hboehm@google.com", "time": "Fri Jul 13 16:35:30 2018 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Fri Jul 13 16:35:30 2018 +0000" }, "message": "Merge \"Revert \"Emit vector mulitply and accumulate instructions for x86.\"\"" }, { "commit": "f5f56c791c5853f43a2a9781c98d5776c7dd5a59", "tree": "ed8270e3a5d0161ebe5bec0606a24cd5e3123e59", "parents": [ "61908880e6565acfadbafe93fa64de000014f1a6" ], "author": { "name": "Hans Boehm", "email": "hboehm@google.com", "time": "Fri Jul 13 00:05:27 2018 +0000" }, "committer": { "name": "Hans Boehm", "email": "hboehm@google.com", "time": "Fri Jul 13 00:05:27 2018 +0000" }, "message": "Revert \"Emit vector mulitply and accumulate instructions for x86.\"\n\nThis reverts commit 61908880e6565acfadbafe93fa64de000014f1a6.\n\nReason for revert: By failing to round multiply results, it does not follow Java rounding rules.\n\nChange-Id: Ic0ef08691bef266c9f8d91973e596e09ff3307c6\n" }, { "commit": "d109e30eab8ba25f8d89be2a83d9036e2d541af2", "tree": "24df91603efe9ce8c4a2efd09ac402aceb10df4e", "parents": [ "c916736ca1e375c276df251446baf2ac8ff3eb13" ], "author": { "name": "Alex Light", "email": "allight@google.com", "time": "Wed Jun 27 10:25:41 2018 -0700" }, "committer": { "name": "Alex Light", "email": "allight@google.com", "time": "Tue Jul 10 08:44:51 2018 -0700" }, "message": "Don\u0027t use StringFactory.newEmptyString in compiled code\n\nWhen compiling debuggable code we would compile a new-instance String\ninstruction into a StringFactory.newEmptyString invoke. This\nadditional invoke could be observed using tracing and is inconsistent\nwith the interpreter, where the string is simply allocated directly.\nIn order to bring these two modes into alignment we added a new\nAllocStringObject quick entrypoint that will be used instead of the\nnormal AllocObject\u003c...\u003e entrypoints when allocating a string. This\nentrypoint directly allocates a new string in the same manner the\ninterpreter does.\n\nNeeds next CL for test to work.\n\nBug: 110884646\nTest: ./test/testrunner/testrunner.py --host --runtime-option\u003d-Xjitthreshold:0 --jit\nTest: Manual inspection of compiled code.\nChange-Id: I7b4b084bcf7dd9a23485c0e3cd2cd04a04b43d3d\n" }, { "commit": "2258c2ef5f6cb25ff12a1dc6dfac1f868892c226", "tree": "48c98b4e03899ec555062b0affd7d7e8bdcb2383", "parents": [ "ad78fb294dbf8bae52835f98cc3e38a6f217781f", "35d5b8a2c5d2fce03be59aa003c3bf3c1b481be0" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue Jul 03 11:47:17 2018 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Tue Jul 03 11:47:17 2018 +0000" }, "message": "Merge \"ART: Do not use std::\u003ccontainer\u003e::at().\"" }, { "commit": "35d5b8a2c5d2fce03be59aa003c3bf3c1b481be0", "tree": "7665f6d1527be61af13c8ef53f10833dd4200cfd", "parents": [ "b28683f43231e65860ecf91c96a8c0234542c019" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue Jul 03 09:18:32 2018 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue Jul 03 09:18:32 2018 +0100" }, "message": "ART: Do not use std::\u003ccontainer\u003e::at().\n\nThese functions are specified as throwing std::out_of_range\nand we do not use exceptions.\n\nTest: m\nTest: m test-art-host-gtest\nTest: testrunner.py --host --optimizing\nChange-Id: I67c365ed6d779c101a18b9f386c751c48ca76e16\n" }, { "commit": "61908880e6565acfadbafe93fa64de000014f1a6", "tree": "40b535db9175f3d959364d5bc30eaab4e2c4b4c4", "parents": [ "b5271dd44a30f498689e503340d3c8d01bf31f07" ], "author": { "name": "Gupta Kumar, Sanjiv", "email": "sanjiv.kumar.gupta@intel.com", "time": "Fri Jun 29 13:06:35 2018 +0530" }, "committer": { "name": "Gupta Kumar, Sanjiv", "email": "sanjiv.kumar.gupta@intel.com", "time": "Mon Jul 02 15:37:38 2018 +0530" }, "message": "Emit vector mulitply and accumulate instructions for x86.\n\nThis patch adds a new cpu vaiant named kabylake and performs\ninstruction simplification to generate VectorMulitplyAccumulate.\n\nTest: ./test.py --host --64\n\nChange-Id: Ie6cc882dadf1322dd4d3ae49bfdb600b0c447765\nSigned-off-by: Gupta Kumar, Sanjiv \u003csanjiv.kumar.gupta@intel.com\u003e\n" }, { "commit": "54159c6c6fe529a55ef3d15a3c8418362d5a43fb", "tree": "2ec461de8ec15383134f4c6e209f4b8a33854277", "parents": [ "44217b253bf4e5990de7051129ecda34f94d7f25" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Wed Jun 20 14:30:08 2018 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Thu Jun 21 13:46:50 2018 +0100" }, "message": "Use HashSet\u003cstd::string\u003e instead of unordered_set\u003c\u003e.\n\nChange the default parameters for HashSet\u003cstd::string\u003e to\nallow passing StringPiece as a key, avoiding an unnecessary\nallocation. Use the HashSet\u003cstd::string\u003e instead of\nstd::unordered_set\u003cstd::string\u003e. Rename HashSet\u003c\u003e functions\nthat mirror std::unordered_multiset\u003c\u003e to lower-case.\n\nFix CompilerDriver::LoadImageClasses() to avoid using\ninvalidated iterator.\n\nTest: m test-art-host-gtest\nTest: testrunner.py --host\nChange-Id: I7f8b82ee0b07befc5a0ee1c420b08a2068ad931e\n" }, { "commit": "4c8e12e66968929b36fac6a2237ca4b04160161e", "tree": "d8bbfd72a978c69ef2eef98c37e7869673c52295", "parents": [ "20c64f8d802cc575cc9a1a1f6c493a611b23e2ee" ], "author": { "name": "Orion Hodson", "email": "oth@google.com", "time": "Fri May 18 08:33:20 2018 +0100" }, "committer": { "name": "Orion Hodson", "email": "oth@google.com", "time": "Mon Jun 11 10:57:17 2018 +0100" }, "message": "ART: Adds an entrypoint for invoke-custom\n\nAdd support for the compiler to call into the runtime for\ninvoke-custom bytecodes.\n\nBug: 35337872\nTest: art/test.py --host -r -t 952\nTest: art/test.py --target --64 -r -t 952\nTest: art/test.py --target --32 -r -t 952\nChange-Id: I821432e7e5248c91b8e1d36c3112974c34171803\n" }, { "commit": "d3083dd15af1cb4ffc13d87a7d2c3be2edb9199d", "tree": "88dd2599ad89da5a4f2668a2c9debd0335669cd0", "parents": [ "6623bc389c43efc87668ce7465e19b195e765e22" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Thu May 17 08:43:47 2018 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue May 22 14:38:14 2018 +0100" }, "message": "Refactor runtime callee save frame info.\n\nAnd avoid storing the info in Runtime.\n\nTest: m test-art-host-gtest\nTest: testrunner.py --host --optimizing --jit\nTest: Pixel 2 XL boots.\nTest: testrunner.py --target --optimizing --jit\nChange-Id: Ib14853fc06c420753993e1f9e82a1b01f5e35e8c\n" }, { "commit": "dbaa5c7ba8935cf87ceb40a4054f9842929e9a51", "tree": "5037625c80cb97a0e13026dc450db28e59ff72ca", "parents": [ "51dda39549033b3c50a7fce5522ffc81325db54b" ], "author": { "name": "Orion Hodson", "email": "oth@google.com", "time": "Thu May 10 08:22:46 2018 +0100" }, "committer": { "name": "Orion Hodson", "email": "oth@google.com", "time": "Fri May 11 11:55:30 2018 +0100" }, "message": "ART: Compiler support for const-method-handle\n\nImplemented as a runtime call.\n\nBug: 66890674\nTest: art/test.py --target -r -t 979\nTest: art/test.py --target --64 -r -t 979\nTest: art/test.py --host -r -t 979\nChange-Id: I67f461c819a7d528d7455afda8b4a59e9aed381c\n" }, { "commit": "18259d7fb7164a5e029df4f883b3a79ccc2403e8", "tree": "ba378bfdef4127bb0607215186e3b150fd38bcdf", "parents": [ "922501b4bbf724e4259477a27764291684eedffb" ], "author": { "name": "Orion Hodson", "email": "oth@google.com", "time": "Thu Apr 12 11:18:23 2018 +0100" }, "committer": { "name": "Orion Hodson", "email": "oth@google.com", "time": "Thu May 10 15:04:09 2018 +0100" }, "message": "ART: Compiler support for const-method-type\n\nImplemented as a runtime call.\n\nBug: 66890674\nTest: art/test.py --target -r -t 979\nTest: art/test.py --target --64 -r -t 979\nTest: art/test.py --host -r -t 979\nChange-Id: I4b3d3969d455d0198cfe122eea8abd54e0ea20ee\n" }, { "commit": "1b19877e78f58ff3f676845380ec1280791d9500", "tree": "b4069e7022aeb9758c8fefcc13521341c67e57ac", "parents": [ "d94a00cdf0519ff92dff1ee59a5a42234a391ddd", "9a6ca9f645c76e9081d8de39e6d98377e208a650" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue May 08 09:32:14 2018 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Tue May 08 09:32:14 2018 +0000" }, "message": "Merge \"MIPS: Skip output verification for assembler tests.\"" }, { "commit": "9a6ca9f645c76e9081d8de39e6d98377e208a650", "tree": "3e24ee038d1cb87811ca5b3836172ab4e538d581", "parents": [ "9926e4615d75cb6c9371e1766a14b0a80089ae18" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Fri May 04 13:06:55 2018 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Fri May 04 13:06:55 2018 +0100" }, "message": "MIPS: Skip output verification for assembler tests.\n\nThese tests were taking too much time, skipping the output\nverification brings it down from ~60s to ~10s per test.\n\nTest: m test-art-host-gtest\nBug: 73903608\nChange-Id: Ifd55c8013dea92de631e7c033111959a794759f2\n" }, { "commit": "d1fa440902e55b6b032a2c5c06a356558e882007", "tree": "1775bf1d2d3640a0bf5e7dac0ea7c9b10d7951ca", "parents": [ "9926e4615d75cb6c9371e1766a14b0a80089ae18" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Thu May 03 15:43:13 2018 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Fri May 04 09:22:48 2018 +0100" }, "message": "ARM: Remove VIXL dependency from ArmManagedRegister.\n\nAlso remove unnecesary DWARF includes.\n\nMotivation: Preparing to move JNI calling conventions\nto runtime/ to unify the GenericJNI frame creation with\nthe JNI compiler.\n\nTest: Rely on TreeHugger.\nChange-Id: If8afc4a4fa41e41f0242962bb225b36633c1c153\n" }, { "commit": "1979c64214bd505c013d573bc8729ee94f7bdea5", "tree": "9b4b2298b8b9d15cd6ca0a1e06e3771f3db2163f", "parents": [ "5a87e19e4bf1b6719c2aad3effde1b38d2c3085c" ], "author": { "name": "David Sehr", "email": "sehr@google.com", "time": "Thu Apr 26 14:41:18 2018 -0700" }, "committer": { "name": "David Sehr", "email": "sehr@google.com", "time": "Thu Apr 26 15:08:49 2018 -0700" }, "message": "Clean up include paths\n\nRemove runtime/globals.h and make clients point to the right globals.h\n(libartbase/base/globals.h). Also make within-libartbase includes\nrelative rather than using base/, etc.\n\nBug: 22322814\nTest: make -j 40 checkbuild\nChange-Id: I99de63fc851d48946ab401e2369de944419041c7\n" }, { "commit": "1ce2b3b76d121a765212d69399241843951973ae", "tree": "6f2bb0191c869e79891df3151d6faba3a297b9a8", "parents": [ "281c99864f635ef4fd005dba4ba0c750cb9a6143" ], "author": { "name": "David Sehr", "email": "sehr@google.com", "time": "Thu Apr 05 11:02:03 2018 -0700" }, "committer": { "name": "David Sehr", "email": "sehr@google.com", "time": "Thu Apr 05 11:07:59 2018 -0700" }, "message": "Move remaining runtime/base stuff to libartbase\n\nMove the remainder of the Arena stuff, plus dumpable and\nruntime/*memory_region* to libartbase. More preparation to build\nprofiling library.\n\nBug: 22322814\nTest: make -j 50 checkbuild\nChange-Id: Iaf26d310c89bc58846553281576c18102f5e4122\n" }, { "commit": "3215fff7ef8fa3c2250b91158560eacc613a4671", "tree": "50d6fe7aff3f8fae31dcf2ca020f5079f49a592f", "parents": [ "6371249ce05032db5d8c4c7ec96bf7fd7264c42f" ], "author": { "name": "David Sehr", "email": "sehr@google.com", "time": "Tue Apr 03 17:10:12 2018 -0700" }, "committer": { "name": "David Sehr", "email": "sehr@google.com", "time": "Wed Apr 04 14:47:57 2018 -0700" }, "message": "Separate Malloc and MemMap ArenaPools\n\nMake ArenaPool an abstract base class and leave MallocArenaPool\nimplementation with it. This enables arena_allocator to be free\nof MemMap, Mutex, etc., in preparation to move the remaining collections\nout of runtime/base to libartbase/base.\n\nBug: 22322814\nTest: make -j 50 test-art-host\n build and boot\n\nChange-Id: Ief84dcbfb749165d9bc82000c6b8f96f93052422\n" }, { "commit": "871bf39030406129af6fbce09f3d4f09af292653", "tree": "82aa2a5a95a01136d33a69286942fedc640741eb", "parents": [ "68c506c7c7dd12d9c23bcfe264889677225a16c2" ], "author": { "name": "Hans Boehm", "email": "hboehm@google.com", "time": "Wed Mar 28 17:44:09 2018 -0700" }, "committer": { "name": "Hans Boehm", "email": "hboehm@google.com", "time": "Thu Mar 29 16:07:28 2018 +0000" }, "message": "Make Remove() atomic, as expected\n\nBug: 31023171\nTest: m -j28 test-art-host\n\nChange-Id: I0d9a4b19f1b307d98f01ec76a47e4748f713437c\n" }, { "commit": "88591fe82f499de10591f5b77efac71f8954eae2", "tree": "bfa126ad55ee091e3b615bd3bb60d5f8cfb6e37a", "parents": [ "e8a4e378c5a928d5de07bee6db99150a57dabcd8" ], "author": { "name": "Orion Hodson", "email": "oth@google.com", "time": "Tue Mar 06 13:35:43 2018 +0000" }, "committer": { "name": "Orion Hodson", "email": "oth@google.com", "time": "Fri Mar 23 15:01:15 2018 +0000" }, "message": "ART: Simplify atomic.h\n\nPrefer std::atomic operations over wrappers in atomic.h. Exceptions\nare cases that relate to the Java data memory operations and CAS\noperations.\n\nBug: 71621075\nTest: art/test.py --host -j32\nTest: art/test.py --target --64 -j4\nChange-Id: I9a157e9dede852c1b2aa67d22e3e604a68a9ef1c\n" }, { "commit": "312f3b2fd0094c028a7d243b116947a35a745806", "tree": "3d7ec049ded98c489098c87250c75e3f711f8290", "parents": [ "0a3d5eb2ff9e70fa5785638da938439835d0337e" ], "author": { "name": "David Sehr", "email": "sehr@google.com", "time": "Mon Mar 19 08:39:26 2018 -0700" }, "committer": { "name": "David Sehr", "email": "sehr@google.com", "time": "Mon Mar 19 11:02:48 2018 -0700" }, "message": "Move some remaining dex utilities\n\nThere were several utilities related to building/walking/testing dex\nfiles that were not in libdexfile. This change consolidates these.\n\nBug: 22322814\nTest: make -j 50 test-art-host\nChange-Id: Id76e9179d03b8ec7d67f7e0f267121f54f0ec2e0\n" }, { "commit": "bd72ae0a2ab82388dbe90bca652786e52a452798", "tree": "71034473754dbb10c2d7ac239849396d1cb31452", "parents": [ "45677e57ad3fb4e73865f401d3eb91d421b63a53", "4ca17350c0c0f7582d909d2776cc3d5f99b4b18a" ], "author": { "name": "Treehugger Robot", "email": "treehugger-gerrit@google.com", "time": "Thu Mar 08 19:19:26 2018 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Thu Mar 08 19:19:26 2018 +0000" }, "message": "Merge \"Saturation arithmetic instructions for X86 and X86_64.\"" }, { "commit": "d395e73e9ed7c3fb5e8a48c3f3141a8997d4a82b", "tree": "f060fc37b00fa4e19b1f556c7fba1adb064ff841", "parents": [ "04bd682576416ef7c3bfb0ab6a74ec60beac724b", "0d2cab5c15215eb7a7b9af0ce11f176dcbd69559" ], "author": { "name": "Treehugger Robot", "email": "treehugger-gerrit@google.com", "time": "Thu Mar 08 13:16:38 2018 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Thu Mar 08 13:16:38 2018 +0000" }, "message": "Merge \"MIPS: Use PCNT to implement VisitIntegerBitCount() and VisitLongBitCount()\"" }, { "commit": "4ca17350c0c0f7582d909d2776cc3d5f99b4b18a", "tree": "7c50ef16f527d8675beb3d2e156760a40c56b35d", "parents": [ "e62555560677f90b909dfa65ae8ac161099e600c" ], "author": { "name": "Aart Bik", "email": "ajcbik@google.com", "time": "Wed Mar 07 15:47:39 2018 -0800" }, "committer": { "name": "Aart Bik", "email": "ajcbik@google.com", "time": "Wed Mar 07 15:58:31 2018 -0800" }, "message": "Saturation arithmetic instructions for X86 and X86_64.\n\nRationale:\nSaturation arithmetic? It is coming!\n\nBug: b/74026074\n\nTest: assember_x86[_64]_test\nChange-Id: I6084161683c5f83ccf632a2ad0280913cec84931\n" }, { "commit": "0d2cab5c15215eb7a7b9af0ce11f176dcbd69559", "tree": "dd4a6564190fe6af52bb968e142deb53a27de6f3", "parents": [ "7a79ebbd7183cc0fda43512a0add884765fd2bf1" ], "author": { "name": "Lena Djokic", "email": "Lena.Djokic@mips.com", "time": "Tue Mar 06 15:20:45 2018 +0100" }, "committer": { "name": "Lena Djokic", "email": "Lena.Djokic@mips.com", "time": "Wed Mar 07 11:37:28 2018 +0100" }, "message": "MIPS: Use PCNT to implement VisitIntegerBitCount() and VisitLongBitCount()\n\nTest: ./testrunner.py --target --optimizing in QEMU\nTest: mma test-art-host-gtest\nChange-Id: I6ce5bdc86f951094f656c2f81ae8fc836d7a0b5c\n" }, { "commit": "c431b9dc4b23cc950eb313695258df5d89f53b22", "tree": "422273559c3ae52caff0c6b1cf1a62a8312f0e26", "parents": [ "f46f46cf5bd32788d5252b7107628a66594a5e98" ], "author": { "name": "David Sehr", "email": "sehr@google.com", "time": "Fri Mar 02 12:01:51 2018 -0800" }, "committer": { "name": "David Sehr", "email": "sehr@google.com", "time": "Mon Mar 05 13:58:20 2018 -0800" }, "message": "Move most of runtime/base to libartbase/base\n\nEnforce the layering that code in runtime/base should not depend on\nruntime by separating it into libartbase. Some of the code in\nruntime/base depends on the Runtime class, so it cannot be moved yet.\nAlso, some of the tests depend on CommonRuntimeTest, which itself needs\nto be factored (in a subsequent CL).\n\nBug: 22322814\nTest: make -j 50 checkbuild\n make -j 50 test-art-host\n\nChange-Id: I8b096c1e2542f829eb456b4b057c71421b77d7e2\n" }, { "commit": "67bf42e89592c3a1c648f927f2ce3ccb189a1161", "tree": "054d5b7adf7cc62d4d2a2118a70c0fbdd1751610", "parents": [ "d961043ff1dd6fddb68aa90c1f939cfafec24219" ], "author": { "name": "David Sehr", "email": "sehr@google.com", "time": "Mon Feb 26 16:43:04 2018 -0800" }, "committer": { "name": "David Sehr", "email": "sehr@google.com", "time": "Wed Feb 28 15:08:21 2018 -0800" }, "message": "Header library to remove dependence on runtime/\n\nAdd a new header library to remove libdexfile and others\u0027 dependence on\nruntime (typically runtime/base) includes in libdexfile. Also a small step\nto tease dexlayout and profman away from relying on these as well.\n\nBug: 22322814\nTest: make -j 50 checkbuild\n make -j 50 test-art-host-gtest\n\nChange-Id: I38e2fe399a75f4bc6318c77a71954c00ea73ec2b\n" }, { "commit": "29a8d8478ee4a3386b715c2a1086b190c57f0aa4", "tree": "3a6ae60ce31b47723b73e2fb369301a7d88666cd", "parents": [ "522c5ce170796bac858bcfbd84158e621d61d40e" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue Feb 13 13:46:15 2018 +0000" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue Feb 13 14:03:55 2018 +0000" }, "message": "x86/x86-64: Fix cmpw() for 9-16 bit immediates.\n\nTest: assembler_x86_test assembler_x86_64_test\nBug: 71853552\nChange-Id: I0d05a5f461557122fffa89a1ba054886dd70ef12\n" }, { "commit": "279e3a3499d208daf467a1690b111dfb06f3e96e", "tree": "74c7d6d860bea25aabae47dc0ca95bafb0571f8e", "parents": [ "ca6f1c0cb7655e90237583c1b6b771d3c8aae95d" ], "author": { "name": "Mathieu Chartier", "email": "mathieuc@google.com", "time": "Wed Jan 24 18:17:55 2018 -0800" }, "committer": { "name": "Mathieu Chartier", "email": "mathieuc@google.com", "time": "Mon Feb 05 13:38:20 2018 -0800" }, "message": "Enable code item deduping\n\nDedupe code items if they have the same contents, this is safe\nbecause of the fixed quickening logic.\n\nRemoved duplicate code items in ManyMethods that caused the startup\nmethods section to be empty in dex2oat_test.\n\nTo avoid errors related to quickening and compilation of shared code\nitems, quickening is currently disabled for shared code items.\n\nBug: 63756964\nTest: test-art-host\n\nChange-Id: I7c62eb746785d787c5269effd396f7be4859d3a6\n" }, { "commit": "ded559460a2c1059e7f6232bb6c0ff954c9d0cf5", "tree": "c8f7baa791b377b62cba53a1a6c57b13b4605e29", "parents": [ "3d2680b40f2ce2b726c2442d6163100aa1237651" ], "author": { "name": "Nicolas Geoffray", "email": "ngeoffray@google.com", "time": "Fri Jan 26 16:33:41 2018 +0000" }, "committer": { "name": "Nicolas Geoffray", "email": "ngeoffray@google.com", "time": "Fri Jan 26 16:33:41 2018 +0000" }, "message": "Add addw support to x86 and x64.\n\nTest: assembler_x86_64_test assembler_x86_test\nChange-Id: I2cfb815f15fa3df393bbeb4043ec208b3bdd9081\n" }, { "commit": "4d17987da58d9411adbed1a18203d76d6119612d", "tree": "f2953a0eb3ebc3f8533d22c14f4a09d7f0d4168d", "parents": [ "e57043081e6b091a9fd23a84043373148ae72f1f" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Fri Jan 19 14:50:10 2018 +0000" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Mon Jan 22 18:35:16 2018 +0000" }, "message": "ART: Add entrypoint and intrinsic for Math.pow().\n\nMathBenchmarks.java#timePow results on taimen\u0027s little cores\nfixed at frequency 1401600 with forced JIT compilation:\n - before:\n - X32: 356.33 (@FastNative), 315.39 (@CriticalNative)\n - X64: 357.31 (@FastNative), 315.37 (@CriticalNative)\n - after (LICM defeats the benchmark):\n - X32: 2.88\n - X64: 2.87\n - after but with kAllSideEffects to prevent LICM:\n - X32: 275.42\n - X64: 275.67\n\nTest: Rely on TreeHugger.\nBug: 70727450\nChange-Id: Iaa31f70acabbd57c163cfeafe02eed67c1348861\n" }, { "commit": "013fd8073f3ece22b0bba1853d3f3430c8a9e4bd", "tree": "d1fb1ce709d4927a8b5f5d7fc673b6932ca4977a", "parents": [ "a7e4a15ba7b40fbe1ecd76ce0d99de90aa42201f" ], "author": { "name": "David Sehr", "email": "sehr@google.com", "time": "Thu Jan 11 22:55:24 2018 -0800" }, "committer": { "name": "David Sehr", "email": "sehr@google.com", "time": "Fri Jan 12 12:47:13 2018 -0800" }, "message": "Create an ART-independent DexFileLoader\n\nOpening DEX files should not rely on instantiating a runtime or having a\nlarge number of dependencies on runtime components. This CL makes\nDexFileLoader a stub class that is independent of ART, and introduces a\nsubclass ArtDexFileLoader that contains the current implementations.\n\nBug: 22322814\nTest: make -j 50 test-art-host\nChange-Id: Ia6e92ae93c347057ea0c10455525239cbbe42c03\n" }, { "commit": "f0a6a1d0536958ebb5bcaef02a0f0cda929b457b", "tree": "5bd80e63136ca017742a3b0fb2ca8a088a2d0cf0", "parents": [ "30f54cc45bd338f9d9079786dae96ea13ab9f163" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Mon Jan 08 14:23:56 2018 +0000" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Mon Jan 08 14:44:51 2018 +0000" }, "message": "ARM: Replace arm::SetCc with vixl32::FlagsUpdate.\n\nAnd delete obsolete test header file.\n\nTest: Rely on TreeHugger.\nChange-Id: I15858b8462198098f21956685a2ad77908b8a186\n" }, { "commit": "30f54cc45bd338f9d9079786dae96ea13ab9f163", "tree": "542b2e8afa185ee3fdeb17fa1637579c110cc2c6", "parents": [ "4cb6347613e37c98bf40d8bb5e6583ac81f4d856", "672b9c1e95beed861a63d4a4c273114387f035a6" ], "author": { "name": "Roland Levillain", "email": "rpl@google.com", "time": "Mon Jan 08 12:37:05 2018 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Mon Jan 08 12:37:05 2018 +0000" }, "message": "Merge \"ARM: Fix breaking changes from recent VIXL update.\"" }, { "commit": "9e734c7ab4599d7747a05db0dc73c7b668cb6683", "tree": "dce1d1993734a947fb2e6f626eb1b425cb72143b", "parents": [ "b496af808eaf3af5ebac50aef4fbec33323b5016" ], "author": { "name": "David Sehr", "email": "sehr@google.com", "time": "Thu Jan 04 17:56:19 2018 -0800" }, "committer": { "name": "David Sehr", "email": "sehr@google.com", "time": "Fri Jan 05 11:07:19 2018 -0800" }, "message": "Create dex subdirectory\n\nMove all the DexFile related source to a common subdirectory dex/ of\nruntime.\n\nBug: 71361973\nTest: make -j 50 test-art-host\nChange-Id: I59e984ed660b93e0776556308be3d653722f5223\n" }, { "commit": "4abc0012a4d9dfe1074b904462b96bc9c71b5f3a", "tree": "ddc9aa77d480d4c7e346036612c78d3509dc625a", "parents": [ "3165bb09dc04b61abd04bf8e263dd85d610694e4", "a556e6ba500ba54d1ca90d6a947dd962d9c287c7" ], "author": { "name": "Treehugger Robot", "email": "treehugger-gerrit@google.com", "time": "Thu Jan 04 14:01:34 2018 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Thu Jan 04 14:01:34 2018 +0000" }, "message": "Merge \"MIPS: InstructionCodeGeneratorMIPS*::DivRemByPowerOfTwo()\"" }, { "commit": "a556e6ba500ba54d1ca90d6a947dd962d9c287c7", "tree": "f9e747c6218ca741c7b0783a9d10dedf22dd36b3", "parents": [ "b0ddceb337f614dc2600d19b82fb4a6596aa7d4c" ], "author": { "name": "Lena Djokic", "email": "Lena.Djokic@mips.com", "time": "Wed Dec 13 12:09:42 2017 +0100" }, "committer": { "name": "Lena Djokic", "email": "Lena.Djokic@mips.com", "time": "Wed Jan 03 17:40:01 2018 +0100" }, "message": "MIPS: InstructionCodeGeneratorMIPS*::DivRemByPowerOfTwo()\n\nReplace [d]sll+[d]srl with [d]ins on R2+.\n\nChange-Id: I7587e46c47c8ce413d81a5c6c29d91e32a14d855\n" }, { "commit": "4557b3858a66aa20e42bce937e1f0620aad880a2", "tree": "8f34d8f014b11f17c6351bb955fcc74c940b8d16", "parents": [ "90f20973356900e340998e8e2b34230e5c4c8fb0" ], "author": { "name": "Orion Hodson", "email": "oth@google.com", "time": "Wed Jan 03 11:47:54 2018 +0000" }, "committer": { "name": "Orion Hodson", "email": "oth@google.com", "time": "Wed Jan 03 12:45:40 2018 +0000" }, "message": "ART: Rename Atomic::CompareExchange methods\n\nRenames Atomic::CompareExchange methods to Atomic::CompareAndSet\nequivalents. These methods return a boolean and do not get the witness\nvalue. This makes space for Atomic::CompareAndExchange methods in a\nlater commit that will return a boolean and get the witness value.\n\nThis is pre-work for VarHandle accessors which require both forms.\n\nBug: 65872996\nTest: art/test.py --host -j32\nChange-Id: I9c691250e5556cbfde7811381b06d2920247f1a1\n" }, { "commit": "672b9c1e95beed861a63d4a4c273114387f035a6", "tree": "4bee8c0fe1794213fdd5502ad57dcb1ebfeaae7a", "parents": [ "a43a89470597a1d34a403add4f82cfc155e7bc33" ], "author": { "name": "Artem Serov", "email": "artem.serov@linaro.org", "time": "Tue Dec 05 18:04:07 2017 +0000" }, "committer": { "name": "Artem Serov", "email": "artem.serov@linaro.org", "time": "Mon Dec 18 13:48:42 2017 +0000" }, "message": "ARM: Fix breaking changes from recent VIXL update.\n\nTest: test-art-target, test-art-host\n\nChange-Id: I31de1e2075226542b9919f6ca054fd5bf237e690\n" }, { "commit": "57943810cfc789da890d73621741729da5feaaf8", "tree": "367677a982a45af98ffe3e79543615875e8550b4", "parents": [ "d5153627778e71ef68b510ce03c77467fa4d85bd" ], "author": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Wed Dec 06 21:39:13 2017 -0800" }, "committer": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Thu Dec 07 16:26:11 2017 -0800" }, "message": "ART: Replace base/logging with android-base/logging\n\nReplace wherever possible. ART\u0027s base/logging is now mainly VLOG\nand initialization code that is unnecessary to pull in and makes\nchanges to verbose logging more painful than they have to be.\n\nTest: m test-art-host\nChange-Id: I3e3a4672ba5b621e57590a526c7d1c8b749e4f6e\n" }, { "commit": "71d26020570127ea584ca39df64d1506c0982387", "tree": "69ef5b02c51d85fe093f5aee93a636cbce17dfe8", "parents": [ "f4e284fa81141f8c125981ae5d169affd1181fcb", "a247dea6612156deaf17e4ab099e8ba2b2d30536" ], "author": { "name": "Treehugger Robot", "email": "treehugger-gerrit@google.com", "time": "Mon Dec 04 23:01:32 2017 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Mon Dec 04 23:01:32 2017 +0000" }, "message": "Merge \"MIPS32: Fix and refactor in/out reg mask code\"" }, { "commit": "a247dea6612156deaf17e4ab099e8ba2b2d30536", "tree": "8fb57db9dafd8bbac0b04d8971bf3545c4c839e6", "parents": [ "01354124bcc2d4d4707429cccf241e858f7fcf40" ], "author": { "name": "Alexey Frunze", "email": "Alexey.Frunze@mips.com", "time": "Fri Nov 03 18:43:04 2017 -0700" }, "committer": { "name": "Alexey Frunze", "email": "Alexey.Frunze@mips.com", "time": "Mon Dec 04 10:56:02 2017 -0800" }, "message": "MIPS32: Fix and refactor in/out reg mask code\n\nThis is mostly for clarity and future work.\n\nThis fixes the following:\n- aui has an out reg, not an in/out reg\n- maddv.df, msubv.df, fmadd.df, fmsub.df have an\n in/out reg, not a simply out reg\n\nThis also ensures consistent marking of even-numbered 32-bit\nFPRs used by FPR load and store instructions (odd-numbered\n32-bit FPRs remain unmarked as if there are no paired FPRs;\nwe don\u0027t use odd-numbered 32-bit FPRs to hold single-precision\nvalues).\n\nTest: test-art-host-gtest\nTest: booted MIPS32R2 in QEMU\nTest: booted MIPS64R6 in QEMU\nTest: testrunner.py --target --optimizing --32\n (on CI20 and MIPS32R6)\nTest: test-art-target-gtest32\n (on CI20 and MIPS32R6)\n\nChange-Id: I408b8ac063c9b1cc6f036dda095d1e3e1e2e1ef1\n" }, { "commit": "5573c37e795668eca81a8488078f798d977685c3", "tree": "5e7675d6c1ca9ed1c31834e52282bfb9f73dc2a4", "parents": [ "1598a77ca3559c8a59902f26ee887504b8159859" ], "author": { "name": "Igor Murashkin", "email": "iam@google.com", "time": "Thu Nov 16 13:34:30 2017 -0800" }, "committer": { "name": "Igor Murashkin", "email": "iam@google.com", "time": "Thu Nov 16 14:42:49 2017 -0800" }, "message": "cpplint: Remove many unnecessary NOLINT\n\nNow that we updated to upstream cpplint, a lot of these NOLINTs are no\nlonger necessary.\n\nBug: 68951293\nChange-Id: If8ed5ffe89727f313f907a214b6d8fd2a2eddbad\n" }, { "commit": "2ffb703bf431d74326c88266b4ddaf225eb3c6ad", "tree": "0552c3c76a42b18f9e7460d501fb71a6dc2e7f33", "parents": [ "c4b6f3116f15c8e4fdf2e4f604ababdee12d8923" ], "author": { "name": "Igor Murashkin", "email": "iam@google.com", "time": "Wed Nov 08 13:35:21 2017 -0800" }, "committer": { "name": "Igor Murashkin", "email": "iam@google.com", "time": "Wed Nov 08 15:15:52 2017 -0800" }, "message": "cpplint: Cleanup errors\n\nCleanup errors from upstream cpplint in preparation\nfor moving art\u0027s cpplint fork to upstream tip-of-tree cpplint.\n\nTest: cd art \u0026\u0026 mm\nBug: 68951293\nChange-Id: I15faed4594cbcb8399850f8bdee39d42c0c5b956\n" }, { "commit": "72aba71d00dd0c420a6ff196066e9378339d46d8", "tree": "ebe2840351820f536b11f1c0f4628205cd6c1251", "parents": [ "3b7ce4ecc6994ea73022c1c4d2df7a3f4fc7471c" ], "author": { "name": "Lena Djokic", "email": "Lena.Djokic@mips.com", "time": "Mon Oct 30 15:47:20 2017 +0100" }, "committer": { "name": "Lena Djokic", "email": "Lena.Djokic@mips.com", "time": "Wed Nov 08 10:12:18 2017 +0100" }, "message": "MIPS: Add asub_s/u.df\n\nThese instructions are needed for implementing Sum-of-Abs-Differences\nvisitor.\n\nTest: mma test-art-host-gtest\nChange-Id: Ie708f30a450b0558215f59f21bb49b68c852f247\n" }, { "commit": "33bff25bcd7a02d35c54f63740eadb1a4833fc92", "tree": "553db4f60878acf2a0fa7036a739d406df9a29b7", "parents": [ "321b3ca9a36d769283c64d4bdee0798db80af524" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Wed Nov 01 14:35:42 2017 +0000" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Thu Nov 02 10:11:02 2017 +0000" }, "message": "ART: Make InstructionSet an enum class and add kLast.\n\nAdding InstructionSet::kLast shall make it easier to encode\nthe InstructionSet in fewer bits using BitField\u003c\u003e. However,\nintroducing `kLast` into the `art` namespace is not a good\nidea, so we change the InstructionSet to an enum class.\nThis also uncovered a case of InstructionSet::kNone being\nerroneously used instead of vixl32::Condition::None(), so\nit\u0027s good to remove `kNone` from the `art` namespace.\n\nTest: m test-art-host-gtest\nTest: testrunner.py --host --optimizing\nChange-Id: I6fa6168dfba4ed6da86d021a69c80224f09997a6\n" }, { "commit": "715f43e1553330bc804cea2951be195473dc343d", "tree": "55e143005efe10e8448c91eff6b88a635af2a3f6", "parents": [ "9e842d3e7d6102d964178e36e5d596ca91895147" ], "author": { "name": "Chris Larsen", "email": "chris.larsen@imgtec.com", "time": "Mon Oct 23 11:00:32 2017 -0700" }, "committer": { "name": "Chris Larsen", "email": "chris.larsen@imgtec.com", "time": "Mon Oct 23 11:00:32 2017 -0700" }, "message": "MIPS32: Improve stack alignment, use sdc1/ldc1, where possible.\n\n- Ensure that SP is a multiple of 16 at all times, and\n- Use ldc1/sdc1 to load/store FPU registers from/to 8-byte-aligned\n locations wherever possible.\n\nUse `export ART_MIPS32_CHECK_ALIGNMENT\u003dtrue` when building Android\nto enable the new runtime alignment checks.\n\nTest: Boot \u0026 run tests on 32-bit version of QEMU, and CI-20.\nTest: test/testrunner/testrunner.py --target --optimizing --32\nTest: test-art-host-gtest\nTest: test-art-target-gtest\n\nChange-Id: Ia667004573f419fd006098fcfadf5834239cb485\n" }, { "commit": "3309c01e55821f693e3b9cec0ef24969edf2528f", "tree": "cacb4a3775166297b1c9bb9e6236ab901ad725d4", "parents": [ "24276374dcaf95bfc52be2b8193eb4e337de62e4" ], "author": { "name": "Lena Djokic", "email": "Lena.Djokic@imgtec.com", "time": "Fri Oct 13 14:34:32 2017 +0200" }, "committer": { "name": "Lena Djokic", "email": "Lena.Djokic@imgtec.com", "time": "Thu Oct 19 11:24:55 2017 +0200" }, "message": "MIPS: Introduce a few MSA instructions\n\nThese instructions are needed for SIMD reduction.\nAlso added assembler tests for each instruction.\n\nTest: mma test-art-host-gtest\n\nChange-Id: I0f02618a14b4cbcc3b81ce51dd2586fa4cdbfd18\n" }, { "commit": "3b8c82f4864624da8a1efd09f02bfec754413a20", "tree": "175a5835f4f62f539b5ae457a9e62ec3dcb91d13", "parents": [ "26d46e51a8c387d26e7971857e26f4582b936204" ], "author": { "name": "Alexey Frunze", "email": "Alexey.Frunze@imgtec.com", "time": "Tue Oct 10 23:01:34 2017 -0700" }, "committer": { "name": "Alexey Frunze", "email": "Alexey.Frunze@imgtec.com", "time": "Mon Oct 16 17:06:21 2017 -0700" }, "message": "MIPS32R2: Enable table-based switch in presence of irreducible loops\n\nTest: test-art-host-gtest\nTest: booted MIPS32R2 in QEMU\nTest: testrunner.py --target --optimizing --32\nTest: repeat all of the above with suppressed generation\n of HMipsPackedSwitch\n\nChange-Id: Ic8a27d88cd2d7eebaf5826ce8fd1a5607a024844\n" }, { "commit": "292567ee71a20bfc59513c6af290495e4b92b2cb", "tree": "6f2fb5ed3caec12b2193b179864dcd87578d2f52", "parents": [ "b95f45e67a3e4a14aab63b19f101547658d7514b" ], "author": { "name": "Mathieu Chartier", "email": "mathieuc@google.com", "time": "Thu Oct 12 13:24:38 2017 -0700" }, "committer": { "name": "Mathieu Chartier", "email": "mathieuc@google.com", "time": "Thu Oct 12 13:48:31 2017 -0700" }, "message": "Rename NativeDexFile -\u003e StandardDexFile\n\nMotivation: The new name is cleaner.\n\nBug: 63756964\nTest: test-art-host\nChange-Id: I0e52015dbd929fe247305070cef03d86bcdeb54b\n" }, { "commit": "0284f43d625f0776ee0586a7cc321e11f5405e8c", "tree": "983c86ff79f2a5a089bfa44ec27a5f2c5d6206b6", "parents": [ "128acd4b5b34cdd51328de03df085deaa040b864", "52d52f5dc3e005829926e68c656fb27e8b008ae9" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Thu Oct 12 09:05:08 2017 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Thu Oct 12 09:05:08 2017 +0000" }, "message": "Merge changes I4bbb21bf,Ie79b46cd,Ia50aafc8\n\n* changes:\n Use ScopedArenaAllocator in GVN.\n Use ScopedArenaAllocator for Phi elimination pass.\n Use ScopedArenaAllocator for building HGraph.\n" }, { "commit": "79c87da9d4698ec58ece65af0065eebd55a1cfe0", "tree": "399797f37712da9d20829d5b5059b6c84943cb02", "parents": [ "656e97f949df4081fba908113406b32915174502" ], "author": { "name": "Mathieu Chartier", "email": "mathieuc@google.com", "time": "Tue Oct 10 11:54:29 2017 -0700" }, "committer": { "name": "Mathieu Chartier", "email": "mathieuc@google.com", "time": "Wed Oct 11 14:47:06 2017 -0700" }, "message": "Add DexFileLoader class\n\nAdded DexFileLoader class, moved functionality from DexFile there:\n- Multidex loading logic\n- DexFile opening logic for Zip and etc\n- Some other helpers\n\nBug: 63756964\nTest: test-art-host\n\nChange-Id: Ic3dfa458947d4b69912dea5cdd836e7e8f55061c\n" }, { "commit": "7b074bf1ce559541d0c19ef793d9702a415ff74d", "tree": "acaf022c330649de7a1a4b372308132f44091c70", "parents": [ "432d91004b79c79deebeee6f6197e43adf6caafd" ], "author": { "name": "Mathieu Chartier", "email": "mathieuc@google.com", "time": "Mon Sep 25 16:22:36 2017 -0700" }, "committer": { "name": "Mathieu Chartier", "email": "mathieuc@google.com", "time": "Wed Oct 11 11:30:11 2017 -0700" }, "message": "Add a shared interface for different types of dex files\n\nRepurposed DexFile to be the shared API. Will be used for abstracting\naccesses to original dex files and CompactDex files.\n\nAs implementation diverges, functionality will be moved from DexFile\naccordingly.\n\nWill consider renaming DexFile -\u003e IDexFile in a follow up CL.\n\nBug: 63756964\nTest: test-art-host\n\nChange-Id: Iad2508c2b9a7b6e0669fca5f7d10299a9b1541a2\n" }, { "commit": "69d310e0317e2fce97bf8c9c133c5c2c0332e61d", "tree": "fba05a1530e6fc4a2e6950303c1f7c6b0ffbb936", "parents": [ "e764d2e50c544c2cb98ee61a15d613161ac6bd17" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Mon Oct 09 14:12:23 2017 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Wed Oct 11 09:44:26 2017 +0100" }, "message": "Use ScopedArenaAllocator for building HGraph.\n\nMemory needed to compile the two most expensive methods for\naosp_angler-userdebug boot image:\n BatteryStats.dumpCheckinLocked() : 21.1MiB -\u003e 20.2MiB\n BatteryStats.dumpLocked(): 42.0MiB -\u003e 40.3MiB\nThis is because all the memory previously used by the graph\nbuilder is reused by later passes.\n\nAnd finish the \"arena\"-\u003e\"allocator\" renaming; make renamed\nallocator pointers that are members of classes const when\nappropriate (and make a few more members around them const).\n\nTest: m test-art-host-gtest\nTest: testrunner.py --host\nBug: 64312607\nChange-Id: Ia50aafc80c05941ae5b96984ba4f31ed4c78255e\n" }, { "commit": "0967cd94860178a5809a9678d005b18c20c24707", "tree": "f9e0c97fc7efbdbd8236b1f280227f1c9457d089", "parents": [ "464f8cd7385a9958c3171e2feaa93c726043bbf8", "e764d2e50c544c2cb98ee61a15d613161ac6bd17" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Mon Oct 09 12:58:04 2017 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Mon Oct 09 12:58:04 2017 +0000" }, "message": "Merge \"Use ScopedArenaAllocator for register allocation.\"" }, { "commit": "464f8cd7385a9958c3171e2feaa93c726043bbf8", "tree": "3ad72d1411c91c68361a1179581decc0e4d96f03", "parents": [ "e4c00b3af3ccf460e4b0332a04dc9eaeffee5c7a", "ca6fff898afcb62491458ae8bcd428bfb3043da1" ], "author": { "name": "Treehugger Robot", "email": "treehugger-gerrit@google.com", "time": "Mon Oct 09 10:24:27 2017 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Mon Oct 09 10:24:27 2017 +0000" }, "message": "Merge \"ART: Use ScopedArenaAllocator for pass-local data.\"" }, { "commit": "e764d2e50c544c2cb98ee61a15d613161ac6bd17", "tree": "112aa7ca459d2edb4f800897060a2407fcc622c7", "parents": [ "ca6fff898afcb62491458ae8bcd428bfb3043da1" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Thu Oct 05 14:35:55 2017 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Mon Oct 09 10:39:22 2017 +0100" }, "message": "Use ScopedArenaAllocator for register allocation.\n\nMemory needed to compile the two most expensive methods for\naosp_angler-userdebug boot image:\n BatteryStats.dumpCheckinLocked() : 25.1MiB -\u003e 21.1MiB\n BatteryStats.dumpLocked(): 49.6MiB -\u003e 42.0MiB\nThis is because all the memory previously used by Scheduler\nis reused by the register allocator; the register allocator\nhas a higher peak usage of the ArenaStack.\n\nAnd continue the \"arena\"-\u003e\"allocator\" renaming.\n\nTest: m test-art-host-gtest\nTest: testrunner.py --host\nBug: 64312607\nChange-Id: Idfd79a9901552b5147ec0bf591cb38120de86b01\n" }, { "commit": "ca6fff898afcb62491458ae8bcd428bfb3043da1", "tree": "195a6b16d3a4b34acc2faf91ce56f448efb15e07", "parents": [ "aa7273e56fbafc2692c8d20a31b50d2f4bdd2aa1" ], "author": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Tue Oct 03 14:49:14 2017 +0100" }, "committer": { "name": "Vladimir Marko", "email": "vmarko@google.com", "time": "Fri Oct 06 17:53:50 2017 +0100" }, "message": "ART: Use ScopedArenaAllocator for pass-local data.\n\nPasses using local ArenaAllocator were hiding their memory\nusage from the allocation counting, making it difficult to\ntrack down where memory was used. Using ScopedArenaAllocator\nreveals the memory usage.\n\nThis changes the HGraph constructor which requires a lot of\nchanges in tests. Refactor these tests to limit the amount\nof work needed the next time we change that constructor.\n\nTest: m test-art-host-gtest\nTest: testrunner.py --host\nTest: Build with kArenaAllocatorCountAllocations \u003d true.\nBug: 64312607\nChange-Id: I34939e4086b500d6e827ff3ef2211d1a421ac91a\n" }, { "commit": "a820ff736a2907b6e7421ca2a26e6d7af9a7c84d", "tree": "c350e7bcddf36f2aef9cdba26b4de028a2ce829f", "parents": [ "aa7273e56fbafc2692c8d20a31b50d2f4bdd2aa1" ], "author": { "name": "Roland Levillain", "email": "rpl@google.com", "time": "Thu Oct 05 19:18:25 2017 +0100" }, "committer": { "name": "Roland Levillain", "email": "rpl@google.com", "time": "Fri Oct 06 16:38:01 2017 +0100" }, "message": "Instrument code generated by JNI compiler to check the Marking Register.\n\nGenerate run-time code in the JNI compiler checking that the\nMarking Register\u0027s value matches `self.tls32_.is_gc_marking` in\ndebug mode (on target; and on host with AOT when compiling the\ncore image). If a check fails, abort.\n\nTest: m test-art-target\nTest: m test-art-target with tree built with ART_USE_READ_BARRIER\u003dfalse\nTest: ARM64 device boot test\nTest: ARM64 device boot test with libartd.\nBug: 37707231\nChange-Id: I6494b5f34a1b43d7b0102c52fd8e4a7c9f32b34f\n" }, { "commit": "0d127e10de0b06ec22d8e855d1d62773c4ede101", "tree": "9ae3f93e78303272785b8321279226c1009854b0", "parents": [ "9c0a6ce0a41eaf78f3fc3224fc34195601b6e0b3" ], "author": { "name": "Roland Levillain", "email": "rpl@google.com", "time": "Wed Jul 05 17:01:11 2017 +0100" }, "committer": { "name": "Roland Levillain", "email": "rpl@google.com", "time": "Wed Oct 04 19:49:51 2017 +0100" }, "message": "Do not refresh the Marking Register in CriticalNative methods.\n\nCriticalNative methods shall not be suspended and hence do not\nrequire MR to be refreshed in compiled JNI code.\n\nThis change is for ARM and ARM64 only.\n\nImpact on Critical Native benchmarks times (median of 10 runs,\nlower is better):\n\n* angler-userdebug - ARMv7\n\n** All cores\n\n NativeDowncallStaticCritical -2.78%\n NativeDowncallStaticCritical6 -1.79%\n\n** Little cores only\n\n NativeDowncallStaticCritical -1.66%\n NativeDowncallStaticCritical6 -1.27%\n\n** Big cores only\n\n NativeDowncallStaticCritical -2.66%\n NativeDowncallStaticCritical6 -1.70%\n\n* angler-userdebug - ARMv8\n\n** All cores\n\n NativeDowncallStaticCritical -3.52%\n NativeDowncallStaticCritical6 -1.79%\n\n** Little cores only\n\n NativeDowncallStaticCritical -1.63%\n NativeDowncallStaticCritical6 -1.27%\n\n** Big cores only\n\n NativeDowncallStaticCritical -3.87%\n NativeDowncallStaticCritical6 -1.75%\n\nTest: m test-art-target\nTest: m test-art-target with tree built with ART_USE_READ_BARRIER\u003dfalse\nTest: m test-art-host-gtest\nTest: ARM64 device boot test\nTest: ARM device boot test\nBug: b/37707231\nChange-Id: I95d61b9ecde0afffdd5fd44763b19caa06025ec8\n" }, { "commit": "956dac258797a22ebe970be424cbf77a471a4d54", "tree": "1af918328817eb0e72b638bbef684edd7eab9428", "parents": [ "2a7b84ba85caa95f6bdb9ad5be3f93b2c742d366" ], "author": { "name": "Rahul Chaudhry", "email": "rahulchaudhry@google.com", "time": "Wed Sep 27 16:33:40 2017 -0700" }, "committer": { "name": "Rahul Chaudhry", "email": "rahulchaudhry@google.com", "time": "Wed Sep 27 16:33:40 2017 -0700" }, "message": "assembler_thumb_test: use \u0027objdump -D -M force-thumb\u0027 to disassemble.\n\nNewer version of objcopy cannot strip \u0027$d\u0027 from an object file, as it is\nimplicitly marked as \u0027precious\u0027. This is intentional, introduced in the\nupstream binutils repository by this commit:\n- https://sourceware.org/git/?p\u003dbinutils-gdb.git;a\u003dcommit;h\u003dfca2a38fdb391f810e309a12d5279047d4edac34\n\nSince stripping of \u0027$d\u0027 was being done only so we can disassemble\nthe object file with \u0027objdump -d\u0027, switch to using \u0027objdump -D -M\nforce-thumb\u0027 to force disassembly as thumb instructions.\n\nBug: None\nTest: m test-art-host-gtest-assembler_thumb_test\nChange-Id: I815f9f3a7949bdc49d872c9b726c87b3199b66ca\n" }, { "commit": "f7754e861f0dec2d4772d61102fa93252258f672", "tree": "fdd1a2b81468a8310eae93c070b0ad2a6e290767", "parents": [ "b407afe983f8b106a5007d07aa2523ffc6525018" ], "author": { "name": "Aart Bik", "email": "ajcbik@google.com", "time": "Wed Sep 20 10:33:06 2017 -0700" }, "committer": { "name": "Aart Bik", "email": "ajcbik@google.com", "time": "Wed Sep 20 10:35:21 2017 -0700" }, "message": "Add more repeat support and register views.\n\nRationale:\nThis enables exhaustive testing of instructions\nthat use various memory addressing modes and\nregister views (full, half, quarter, etc.).\n\nBug: 18380245\nBug: 18380559\nBug: 18380348\n\nTest: assembler_x86[_64]_test\nChange-Id: I598c3e35a4791166ab629479ccb969ef3c6494b8\n" }, { "commit": "09659c22dc2f2c85a0ade965d1fc5160944b8692", "tree": "66fd5729395d27569c4d9d255a5ce9b44cb000bf", "parents": [ "4d159807a4854caa6396b708a38bbd6fa49d736f" ], "author": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Mon Sep 18 18:23:32 2017 -0700" }, "committer": { "name": "Andreas Gampe", "email": "agampe@google.com", "time": "Tue Sep 19 10:26:51 2017 -0700" }, "message": "ART: Remove heap poisoning from globals.h\n\nRemove mostly-unused include and move it to its users.\n\nTest: m\nChange-Id: Ibb40f919db64a490290c6e18cf1123aaf44199fc\n" }, { "commit": "fc8b422c286501346b5b797420fb616aaa5e952a", "tree": "61c857a895cdad9ce387a899f92824701259df32", "parents": [ "7090dfe84f78b1928fcbdfd664d0dd9ea52633ff" ], "author": { "name": "Mathieu Chartier", "email": "mathieuc@google.com", "time": "Sun Sep 17 13:44:24 2017 -0700" }, "committer": { "name": "Mathieu Chartier", "email": "mathieuc@google.com", "time": "Mon Sep 18 10:57:06 2017 -0700" }, "message": "Clean up AtomicDexRefMap\n\nMake ClassReference, TypeReference, and MethodReference extend\nDexFileReference. This enables using all of these types as the key\nfor AtomicDexRefMap.\n\nTest: test-art-host\nBug: 63851220\nBug: 63756964\n\nChange-Id: Ida3c94cadb53272cb5057e5cebc5971c1ab4d366\n" }, { "commit": "fe712a8b9c247d66df013f2b4b6faa6009d745bb", "tree": "45897680a8f1897b6d33c3bccfad859bb6d9abe0", "parents": [ "3597f51c4af8d5e32c21789ea7b7cd75dc078120", "486dda03900a215650f71a9068759978aa77c699" ], "author": { "name": "Nicolas Geoffray", "email": "ngeoffray@google.com", "time": "Mon Sep 18 08:28:15 2017 +0000" }, "committer": { "name": "Gerrit Code Review", "email": "noreply-gerritcodereview@google.com", "time": "Mon Sep 18 08:28:15 2017 +0000" }, "message": "Merge \"Add support for registering classpath classes status.\"" }, { "commit": "caa31e732bc9bb0007c39c504b109a4867ee5dd9", "tree": "1ed4201e4b76f52b2354c0186c58c693093dacdc", "parents": [ "5809417697955005751d60498964f6d4bd4a096f" ], "author": { "name": "Aart Bik", "email": "ajcbik@google.com", "time": "Thu Sep 14 17:08:50 2017 -0700" }, "committer": { "name": "Aart Bik", "email": "ajcbik@google.com", "time": "Fri Sep 15 11:05:56 2017 -0700" }, "message": "Add repeat support for memory addresses.\n\nRationale:\nThis enables exhaustive testing of instructions\nthat use memory addresses. First use case of\nthe generics is x86.\n\nBug: 18380245\nBug: 18380559\nBug: 18380348\n\nTest: assembler_x86[_64]_test\n\nChange-Id: Ib0ad6fa65477b0c6fc04642ff980a4b9543d16d5\n" }, { "commit": "486dda03900a215650f71a9068759978aa77c699", "tree": "1f2a1331d3ec474c979db5f9a35dd11f453abc25", "parents": [ "b072ec25f8a71420ee77b068a28a2669420f6150" ], "author": { "name": "Nicolas Geoffray", "email": "ngeoffray@google.com", "time": "Mon Sep 11 14:15:52 2017 +0100" }, "committer": { "name": "Nicolas Geoffray", "email": "ngeoffray@google.com", "time": "Fri Sep 15 12:45:28 2017 +0100" }, "message": "Add support for registering classpath classes status.\n\nBy doing class unloading after each dex file compilation, we are loosing\naway verification done on classpath classes.\n\nThis change introduces a new table for keeping around class status of\nclasspath classes.\n\nMultidex quickening compilation improved by ~5% by not re-verifying classpath\nclasses.\n\nBug: 63467744\n\ntest: test.py\ntest: golem successfully compiles FB\nChange-Id: I629c0a7d86519bbc516f5e59f7cd92ca6ca842eb\n" }, { "commit": "5dafb3c796b16718ff0599ea46277f291aee190d", "tree": "18f82de4ebfc982db30796607ec4949bbd5a663b", "parents": [ "6b411fc9fd94da3c552d8b96cee14f6414e7b734" ], "author": { "name": "Aart Bik", "email": "ajcbik@google.com", "time": "Wed Sep 13 13:10:12 2017 -0700" }, "committer": { "name": "Aart Bik", "email": "ajcbik@google.com", "time": "Wed Sep 13 14:12:18 2017 -0700" }, "message": "Test assembler driver utilities.\n\nRationale:\nQuis custodiet ipsos custodes?\n\nTherefore, it is good to make sure that the drivers\nused to test the assembler are doing what is expected.\nThis also prepares some upcoming improvements wrt.\naddressing modes and different register sizes.\n\nBug: 18380245\nBug: 18380559\nBug: 18380245\n\nTest: assembler_x86[_64]_test\n\nChange-Id: Iadc269c14cb9e15941ec66c362d59d42e9017001\n" } ], "next": "8859cec306080a078f67fbe4511b9ca20edf736e" }