Merge 5.4.136 into android11-5.4-lts

Changes in 5.4.136
	igc: Fix use-after-free error during reset
	igb: Fix use-after-free error during reset
	igc: change default return of igc_read_phy_reg()
	ixgbe: Fix an error handling path in 'ixgbe_probe()'
	igc: Prefer to use the pci_release_mem_regions method
	igc: Fix an error handling path in 'igc_probe()'
	igb: Fix an error handling path in 'igb_probe()'
	fm10k: Fix an error handling path in 'fm10k_probe()'
	e1000e: Fix an error handling path in 'e1000_probe()'
	iavf: Fix an error handling path in 'iavf_probe()'
	igb: Check if num of q_vectors is smaller than max before array access
	igb: Fix position of assignment to *ring
	gve: Fix an error handling path in 'gve_probe()'
	ipv6: fix 'disable_policy' for fwd packets
	selftests: icmp_redirect: remove from checking for IPv6 route get
	selftests: icmp_redirect: IPv6 PMTU info should be cleared after redirect
	pwm: sprd: Ensure configuring period and duty_cycle isn't wrongly skipped
	cxgb4: fix IRQ free race during driver unload
	nvme-pci: do not call nvme_dev_remove_admin from nvme_remove
	perf map: Fix dso->nsinfo refcounting
	perf probe: Fix dso->nsinfo refcounting
	perf env: Fix sibling_dies memory leak
	perf test session_topology: Delete session->evlist
	perf test event_update: Fix memory leak of evlist
	perf dso: Fix memory leak in dso__new_map()
	perf script: Fix memory 'threads' and 'cpus' leaks on exit
	perf lzma: Close lzma stream on exit
	perf probe-file: Delete namelist in del_events() on the error path
	perf data: Close all files in close_dir()
	spi: imx: add a check for speed_hz before calculating the clock
	spi: stm32: Use dma_request_chan() instead dma_request_slave_channel()
	spi: stm32: fixes pm_runtime calls in probe/remove
	regulator: hi6421: Use correct variable type for regmap api val argument
	regulator: hi6421: Fix getting wrong drvdata
	spi: mediatek: fix fifo rx mode
	ASoC: rt5631: Fix regcache sync errors on resume
	liquidio: Fix unintentional sign extension issue on left shift of u16
	s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1]
	bpf, sockmap, tcp: sk_prot needs inuse_idx set for proc stats
	bpftool: Check malloc return value in mount_bpffs_for_pin
	net: fix uninit-value in caif_seqpkt_sendmsg
	efi/tpm: Differentiate missing and invalid final event log table.
	net: decnet: Fix sleeping inside in af_decnet
	KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash
	KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak
	net: sched: fix memory leak in tcindex_partial_destroy_work
	netrom: Decrease sock refcount when sock timers expire
	scsi: iscsi: Fix iface sysfs attr detection
	scsi: target: Fix protect handling in WRITE SAME(32)
	spi: cadence: Correct initialisation of runtime PM again
	bnxt_en: Improve bnxt_ulp_stop()/bnxt_ulp_start() call sequence.
	bnxt_en: Refresh RoCE capabilities in bnxt_ulp_probe()
	bnxt_en: Add missing check for BNXT_STATE_ABORT_ERR in bnxt_fw_rset_task()
	bnxt_en: Check abort error state in bnxt_half_open_nic()
	net: hisilicon: rename CACHE_LINE_MASK to avoid redefinition
	net/tcp_fastopen: fix data races around tfo_active_disable_stamp
	net: hns3: fix rx VLAN offload state inconsistent issue
	net/sched: act_skbmod: Skip non-Ethernet packets
	ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions
	nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
	Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"
	afs: Fix tracepoint string placement with built-in AFS
	r8169: Avoid duplicate sysfs entry creation error
	nvme: set the PRACT bit when using Write Zeroes with T10 PI
	sctp: update active_key for asoc when old key is being replaced
	net: sched: cls_api: Fix the the wrong parameter
	drm/panel: raspberrypi-touchscreen: Prevent double-free
	proc: Avoid mixing integer types in mem_rw()
	Revert "MIPS: add PMD table accounting into MIPS'pmd_alloc_one"
	s390/ftrace: fix ftrace_update_ftrace_func implementation
	s390/boot: fix use of expolines in the DMA code
	ALSA: usb-audio: Add missing proc text entry for BESPOKEN type
	ALSA: usb-audio: Add registration quirk for JBL Quantum headsets
	ALSA: sb: Fix potential ABBA deadlock in CSP driver
	ALSA: hdmi: Expose all pins on MSI MS-7C94 board
	xhci: Fix lost USB 2 remote wake
	KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
	KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state
	usb: hub: Disable USB 3 device initiated lpm if exit latency is too high
	usb: hub: Fix link power management max exit latency (MEL) calculations
	USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
	usb: max-3421: Prevent corruption of freed memory
	usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
	USB: serial: option: add support for u-blox LARA-R6 family
	USB: serial: cp210x: fix comments for GE CS1000
	USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
	usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.
	firmware/efi: Tell memblock about EFI iomem reservations
	tracing/histogram: Rename "cpu" to "common_cpu"
	tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.
	btrfs: check for missing device in btrfs_trim_fs
	media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()
	ixgbe: Fix packet corruption due to missing DMA sync
	selftest: use mmap instead of posix_memalign to allocate memory
	userfaultfd: do not untag user pointers
	hugetlbfs: fix mount mode command line processing
	rbd: don't hold lock_rwsem while running_list is being drained
	rbd: always kick acquire on "acquired" and "released" notifications
	nds32: fix up stack guard gap
	drm: Return -ENOTTY for non-drm ioctls
	net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz
	net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear
	iio: accel: bma180: Use explicit member assignment
	iio: accel: bma180: Fix BMA25x bandwidth register values
	btrfs: compression: don't try to compress if we don't have enough pages
	PCI: Mark AMD Navi14 GPU ATS as broken
	perf inject: Close inject.output on exit
	xhci: add xhci_get_virt_ep() helper
	Linux 5.4.136

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I8b7e344b3dd2ee557364f9be285ed9925038a497
tree: 57812bcc2d2331fc557d040e9cc9bfb17947c409
  1. android/
  2. arch/
  3. block/
  4. certs/
  5. crypto/
  6. Documentation/
  7. drivers/
  8. fs/
  9. include/
  10. init/
  11. ipc/
  12. kernel/
  13. lib/
  14. LICENSES/
  15. mm/
  16. net/
  17. samples/
  18. scripts/
  19. security/
  20. sound/
  21. tools/
  22. usr/
  23. virt/
  24. .clang-format
  25. .cocciconfig
  26. .get_maintainer.ignore
  27. .gitattributes
  28. .gitignore
  29. .mailmap
  30. build.config.aarch64
  31. build.config.allmodconfig
  32. build.config.allmodconfig.aarch64
  33. build.config.allmodconfig.arm
  34. build.config.allmodconfig.x86_64
  35. build.config.arm
  36. build.config.common
  37. build.config.db845c
  38. build.config.gki
  39. build.config.gki-debug.aarch64
  40. build.config.gki-debug.x86_64
  41. build.config.gki.aarch64
  42. build.config.gki.x86_64
  43. build.config.gki_kasan
  44. build.config.gki_kasan.aarch64
  45. build.config.gki_kasan.x86_64
  46. build.config.gki_kprobes
  47. build.config.gki_kprobes.aarch64
  48. build.config.gki_kprobes.x86_64
  49. build.config.hikey960
  50. build.config.x86_64
  51. COPYING
  52. CREDITS
  53. Kbuild
  54. Kconfig
  55. MAINTAINERS
  56. Makefile
  57. OWNERS
  58. README
  59. README.md
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry-picked from ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
    - then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry-picked from c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry-picked from ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry-picked from c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [ Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
    - then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)