| /* |
| Copyright (C) Andrew Tridgell 1996 |
| Copyright (C) Paul Mackerras 1996 |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "rsync.h" |
| #include "zlib/zlib.h" |
| |
| extern int do_compression; |
| static int compression_level = Z_DEFAULT_COMPRESSION; |
| |
| /* determine the compression level based on a wildcard filename list */ |
| void set_compression(char *fname) |
| { |
| extern int module_id; |
| char *dont; |
| char *tok; |
| |
| if (!do_compression) return; |
| |
| compression_level = Z_DEFAULT_COMPRESSION; |
| dont = lp_dont_compress(module_id); |
| |
| if (!dont || !*dont) return; |
| |
| if ((dont[0] == '*') && (!dont[1])) { |
| /* an optimization to skip the rest of this routine */ |
| compression_level = 0; |
| return; |
| } |
| |
| dont = strdup(dont); |
| fname = strdup(fname); |
| if (!dont || !fname) return; |
| |
| strlower(dont); |
| strlower(fname); |
| |
| for (tok=strtok(dont," ");tok;tok=strtok(NULL," ")) { |
| if (fnmatch(tok, fname, 0) == 0) { |
| compression_level = 0; |
| break; |
| } |
| } |
| free(dont); |
| free(fname); |
| } |
| |
| /* non-compressing recv token */ |
| static int simple_recv_token(int f,char **data) |
| { |
| static int residue; |
| static char *buf; |
| int n; |
| |
| if (!buf) { |
| buf = (char *)malloc(CHUNK_SIZE); |
| if (!buf) out_of_memory("simple_recv_token"); |
| } |
| |
| if (residue == 0) { |
| int i = read_int(f); |
| if (i <= 0) return i; |
| residue = i; |
| } |
| |
| *data = buf; |
| n = MIN(CHUNK_SIZE,residue); |
| residue -= n; |
| read_buf(f,buf,n); |
| return n; |
| } |
| |
| |
| /* non-compressing send token */ |
| static void simple_send_token(int f,int token, |
| struct map_struct *buf,OFF_T offset,int n) |
| { |
| if (n > 0) { |
| int l = 0; |
| while (l < n) { |
| int n1 = MIN(CHUNK_SIZE,n-l); |
| write_int(f,n1); |
| write_buf(f,map_ptr(buf,offset+l,n1),n1); |
| l += n1; |
| } |
| } |
| /* a -2 token means to send data only and no token */ |
| if (token != -2) { |
| write_int(f,-(token+1)); |
| } |
| } |
| |
| |
| /* Flag bytes in compressed stream are encoded as follows: */ |
| #define END_FLAG 0 /* that's all folks */ |
| #define TOKEN_LONG 0x20 /* followed by 32-bit token number */ |
| #define TOKENRUN_LONG 0x21 /* ditto with 16-bit run count */ |
| #define DEFLATED_DATA 0x40 /* + 6-bit high len, then low len byte */ |
| #define TOKEN_REL 0x80 /* + 6-bit relative token number */ |
| #define TOKENRUN_REL 0xc0 /* ditto with 16-bit run count */ |
| |
| #define MAX_DATA_COUNT 16383 /* fit 14 bit count into 2 bytes with flags */ |
| |
| /* For coding runs of tokens */ |
| static int last_token = -1; |
| static int run_start; |
| static int last_run_end; |
| |
| /* Deflation state */ |
| static z_stream tx_strm; |
| |
| /* Output buffer */ |
| static char *obuf; |
| |
| /* Send a deflated token */ |
| static void |
| send_deflated_token(int f, int token, |
| struct map_struct *buf, OFF_T offset, int nb, int toklen) |
| { |
| int n, r; |
| static int init_done, flush_pending; |
| |
| if (last_token == -1) { |
| /* initialization */ |
| if (!init_done) { |
| tx_strm.next_in = NULL; |
| tx_strm.zalloc = NULL; |
| tx_strm.zfree = NULL; |
| if (deflateInit2(&tx_strm, compression_level, |
| Z_DEFLATED, -15, 8, |
| Z_DEFAULT_STRATEGY) != Z_OK) { |
| rprintf(FERROR, "compression init failed\n"); |
| exit_cleanup(RERR_STREAMIO); |
| } |
| if ((obuf = malloc(MAX_DATA_COUNT+2)) == NULL) |
| out_of_memory("send_deflated_token"); |
| init_done = 1; |
| } else |
| deflateReset(&tx_strm); |
| last_run_end = 0; |
| run_start = token; |
| flush_pending = 0; |
| |
| } else if (last_token == -2) { |
| run_start = token; |
| |
| } else if (nb != 0 || token != last_token + 1 |
| || token >= run_start + 65536) { |
| /* output previous run */ |
| r = run_start - last_run_end; |
| n = last_token - run_start; |
| if (r >= 0 && r <= 63) { |
| write_byte(f, (n==0? TOKEN_REL: TOKENRUN_REL) + r); |
| } else { |
| write_byte(f, (n==0? TOKEN_LONG: TOKENRUN_LONG)); |
| write_int(f, run_start); |
| } |
| if (n != 0) { |
| write_byte(f, n); |
| write_byte(f, n >> 8); |
| } |
| last_run_end = last_token; |
| run_start = token; |
| } |
| |
| last_token = token; |
| |
| if (nb != 0 || flush_pending) { |
| /* deflate the data starting at offset */ |
| int flush = Z_NO_FLUSH; |
| tx_strm.avail_in = 0; |
| tx_strm.avail_out = 0; |
| do { |
| if (tx_strm.avail_in == 0 && nb != 0) { |
| /* give it some more input */ |
| n = MIN(nb, CHUNK_SIZE); |
| tx_strm.next_in = (Bytef *) |
| map_ptr(buf, offset, n); |
| tx_strm.avail_in = n; |
| nb -= n; |
| offset += n; |
| } |
| if (tx_strm.avail_out == 0) { |
| tx_strm.next_out = (Bytef *)(obuf + 2); |
| tx_strm.avail_out = MAX_DATA_COUNT; |
| if (flush != Z_NO_FLUSH) { |
| /* |
| * We left the last 4 bytes in the |
| * buffer, in case they are the |
| * last 4. Move them to the front. |
| */ |
| memcpy(tx_strm.next_out, |
| obuf+MAX_DATA_COUNT-2, 4); |
| tx_strm.next_out += 4; |
| tx_strm.avail_out -= 4; |
| } |
| } |
| if (nb == 0 && token != -2) |
| flush = Z_SYNC_FLUSH; |
| r = deflate(&tx_strm, flush); |
| if (r != Z_OK) { |
| rprintf(FERROR, "deflate returned %d\n", r); |
| exit_cleanup(RERR_STREAMIO); |
| } |
| if (nb == 0 || tx_strm.avail_out == 0) { |
| n = MAX_DATA_COUNT - tx_strm.avail_out; |
| if (flush != Z_NO_FLUSH) { |
| /* |
| * We have to trim off the last 4 |
| * bytes of output when flushing |
| * (they are just 0, 0, ff, ff). |
| */ |
| n -= 4; |
| } |
| if (n > 0) { |
| obuf[0] = DEFLATED_DATA + (n >> 8); |
| obuf[1] = n; |
| write_buf(f, obuf, n+2); |
| } |
| } |
| } while (nb != 0 || tx_strm.avail_out == 0); |
| flush_pending = token == -2; |
| } |
| |
| if (token == -1) { |
| /* end of file - clean up */ |
| write_byte(f, END_FLAG); |
| |
| } else if (token != -2) { |
| /* add the data in the current block to the compressor's |
| history and hash table */ |
| tx_strm.next_in = (Bytef *) map_ptr(buf, offset, toklen); |
| tx_strm.avail_in = toklen; |
| tx_strm.next_out = (Bytef *) obuf; |
| tx_strm.avail_out = MAX_DATA_COUNT; |
| r = deflate(&tx_strm, Z_INSERT_ONLY); |
| if (r != Z_OK || tx_strm.avail_in != 0) { |
| rprintf(FERROR, "deflate on token returned %d (%d bytes left)\n", |
| r, tx_strm.avail_in); |
| exit_cleanup(RERR_STREAMIO); |
| } |
| } |
| } |
| |
| |
| /* tells us what the receiver is in the middle of doing */ |
| static enum { r_init, r_idle, r_running, r_inflating, r_inflated } recv_state; |
| |
| /* for inflating stuff */ |
| static z_stream rx_strm; |
| static char *cbuf; |
| static char *dbuf; |
| |
| /* for decoding runs of tokens */ |
| static int rx_token; |
| static int rx_run; |
| |
| /* Receive a deflated token and inflate it */ |
| static int |
| recv_deflated_token(int f, char **data) |
| { |
| int n, r, flag; |
| static int init_done; |
| static int saved_flag; |
| |
| for (;;) { |
| switch (recv_state) { |
| case r_init: |
| if (!init_done) { |
| rx_strm.next_out = NULL; |
| rx_strm.zalloc = NULL; |
| rx_strm.zfree = NULL; |
| if (inflateInit2(&rx_strm, -15) != Z_OK) { |
| rprintf(FERROR, "inflate init failed\n"); |
| exit_cleanup(RERR_STREAMIO); |
| } |
| if ((cbuf = malloc(MAX_DATA_COUNT)) == NULL |
| || (dbuf = malloc(CHUNK_SIZE)) == NULL) |
| out_of_memory("recv_deflated_token"); |
| init_done = 1; |
| } else { |
| inflateReset(&rx_strm); |
| } |
| recv_state = r_idle; |
| rx_token = 0; |
| break; |
| |
| case r_idle: |
| case r_inflated: |
| if (saved_flag) { |
| flag = saved_flag & 0xff; |
| saved_flag = 0; |
| } else |
| flag = read_byte(f); |
| if ((flag & 0xC0) == DEFLATED_DATA) { |
| n = ((flag & 0x3f) << 8) + read_byte(f); |
| read_buf(f, cbuf, n); |
| rx_strm.next_in = (Bytef *)cbuf; |
| rx_strm.avail_in = n; |
| recv_state = r_inflating; |
| break; |
| } |
| if (recv_state == r_inflated) { |
| /* check previous inflated stuff ended correctly */ |
| rx_strm.avail_in = 0; |
| rx_strm.next_out = (Bytef *)dbuf; |
| rx_strm.avail_out = CHUNK_SIZE; |
| r = inflate(&rx_strm, Z_SYNC_FLUSH); |
| n = CHUNK_SIZE - rx_strm.avail_out; |
| /* |
| * Z_BUF_ERROR just means no progress was |
| * made, i.e. the decompressor didn't have |
| * any pending output for us. |
| */ |
| if (r != Z_OK && r != Z_BUF_ERROR) { |
| rprintf(FERROR, "inflate flush returned %d (%d bytes)\n", |
| r, n); |
| exit_cleanup(RERR_STREAMIO); |
| } |
| if (n != 0 && r != Z_BUF_ERROR) { |
| /* have to return some more data and |
| save the flag for later. */ |
| saved_flag = flag + 0x10000; |
| *data = dbuf; |
| return n; |
| } |
| /* |
| * At this point the decompressor should |
| * be expecting to see the 0, 0, ff, ff bytes. |
| */ |
| if (!inflateSyncPoint(&rx_strm)) { |
| rprintf(FERROR, "decompressor lost sync!\n"); |
| exit_cleanup(RERR_STREAMIO); |
| } |
| rx_strm.avail_in = 4; |
| rx_strm.next_in = (Bytef *)cbuf; |
| cbuf[0] = cbuf[1] = 0; |
| cbuf[2] = cbuf[3] = 0xff; |
| inflate(&rx_strm, Z_SYNC_FLUSH); |
| recv_state = r_idle; |
| } |
| if (flag == END_FLAG) { |
| /* that's all folks */ |
| recv_state = r_init; |
| return 0; |
| } |
| |
| /* here we have a token of some kind */ |
| if (flag & TOKEN_REL) { |
| rx_token += flag & 0x3f; |
| flag >>= 6; |
| } else |
| rx_token = read_int(f); |
| if (flag & 1) { |
| rx_run = read_byte(f); |
| rx_run += read_byte(f) << 8; |
| recv_state = r_running; |
| } |
| return -1 - rx_token; |
| |
| case r_inflating: |
| rx_strm.next_out = (Bytef *)dbuf; |
| rx_strm.avail_out = CHUNK_SIZE; |
| r = inflate(&rx_strm, Z_NO_FLUSH); |
| n = CHUNK_SIZE - rx_strm.avail_out; |
| if (r != Z_OK) { |
| rprintf(FERROR, "inflate returned %d (%d bytes)\n", r, n); |
| exit_cleanup(RERR_STREAMIO); |
| } |
| if (rx_strm.avail_in == 0) |
| recv_state = r_inflated; |
| if (n != 0) { |
| *data = dbuf; |
| return n; |
| } |
| break; |
| |
| case r_running: |
| ++rx_token; |
| if (--rx_run == 0) |
| recv_state = r_idle; |
| return -1 - rx_token; |
| } |
| } |
| } |
| |
| /* |
| * put the data corresponding to a token that we've just returned |
| * from recv_deflated_token into the decompressor's history buffer. |
| */ |
| static void see_deflate_token(char *buf, int len) |
| { |
| int r, blklen; |
| unsigned char hdr[5]; |
| |
| rx_strm.avail_in = 0; |
| blklen = 0; |
| hdr[0] = 0; |
| do { |
| if (rx_strm.avail_in == 0 && len != 0) { |
| if (blklen == 0) { |
| /* Give it a fake stored-block header. */ |
| rx_strm.next_in = (Bytef *)hdr; |
| rx_strm.avail_in = 5; |
| blklen = len; |
| if (blklen > 0xffff) |
| blklen = 0xffff; |
| hdr[1] = blklen; |
| hdr[2] = blklen >> 8; |
| hdr[3] = ~hdr[1]; |
| hdr[4] = ~hdr[2]; |
| } else { |
| rx_strm.next_in = (Bytef *)buf; |
| rx_strm.avail_in = blklen; |
| len -= blklen; |
| blklen = 0; |
| } |
| } |
| rx_strm.next_out = (Bytef *)dbuf; |
| rx_strm.avail_out = CHUNK_SIZE; |
| r = inflate(&rx_strm, Z_SYNC_FLUSH); |
| if (r != Z_OK) { |
| rprintf(FERROR, "inflate (token) returned %d\n", r); |
| exit_cleanup(RERR_STREAMIO); |
| } |
| } while (len || rx_strm.avail_out == 0); |
| } |
| |
| /* |
| * transmit a verbatim buffer of length n followed by a token |
| * If token == -1 then we have reached EOF |
| * If n == 0 then don't send a buffer |
| */ |
| void send_token(int f,int token,struct map_struct *buf,OFF_T offset, |
| int n,int toklen) |
| { |
| if (!do_compression) { |
| simple_send_token(f,token,buf,offset,n); |
| } else { |
| send_deflated_token(f, token, buf, offset, n, toklen); |
| } |
| } |
| |
| |
| /* |
| * receive a token or buffer from the other end. If the reurn value is >0 then |
| * it is a data buffer of that length, and *data will point at the data. |
| * if the return value is -i then it represents token i-1 |
| * if the return value is 0 then the end has been reached |
| */ |
| int recv_token(int f,char **data) |
| { |
| int tok; |
| |
| if (!do_compression) { |
| tok = simple_recv_token(f,data); |
| } else { |
| tok = recv_deflated_token(f, data); |
| } |
| return tok; |
| } |
| |
| /* |
| * look at the data corresponding to a token, if necessary |
| */ |
| void see_token(char *data, int toklen) |
| { |
| if (do_compression) |
| see_deflate_token(data, toklen); |
| } |