Makefile.in - external_rsync - Gitiles

 # Makefile for rsync. This is processed by configure to produce the final
 # Makefile

 prefix=@prefix@
 exec_prefix=@exec_prefix@
 bindir=@bindir@
 mandir=@mandir@

 LIBS=@LIBS@
 CC=@CC@
 CFLAGS=@CFLAGS@
 CPPFLAGS=@CPPFLAGS@
 EXEEXT=@EXEEXT@
 LDFLAGS=@LDFLAGS@

 INSTALLCMD=@INSTALL@
 INSTALLMAN=@INSTALL@

 srcdir=@srcdir@
 VPATH=$(srcdir)
 SHELL=/bin/sh

 VERSION=@VERSION@

 .SUFFIXES:
 .SUFFIXES: .c .o

 HEADERS=byteorder.h config.h errcode.h proto.h rsync.h lib/pool_alloc.h
 LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o \
 	lib/permstring.o lib/pool_alloc.o @LIBOBJS@
 ZLIBOBJ=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
 	zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
 OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o \
 	main.o checksum.o match.o syscall.o log.o backup.o
 OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o \
 	fileio.o batch.o clientname.o chmod.o
 OBJS3=progress.o pipe.o
 DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
 popt_OBJS=popt/findme.o  popt/popt.o  popt/poptconfig.o \
 	popt/popthelp.o popt/poptparse.o
 OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@

 TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o

 # Programs we must have to run the test cases
 CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
 	trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)

 # Objects for CHECK_PROGS to clean
 CHECK_OBJS=getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o

 # note that the -I. is needed to handle config.h when using VPATH
 .c.o:
 @OBJ_SAVE@
 	$(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
 @OBJ_RESTORE@

 all: rsync$(EXEEXT)

 install: all
 	-mkdir -p ${DESTDIR}${bindir}
 	${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
 	-mkdir -p ${DESTDIR}${mandir}/man1
 	-mkdir -p ${DESTDIR}${mandir}/man5
 	${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1
 	${INSTALLMAN} -m 644 $(srcdir)/rsyncd.conf.5 ${DESTDIR}${mandir}/man5

 install-strip:
 	$(MAKE) INSTALL_STRIP='-s' install

 rsync$(EXEEXT): $(OBJS)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)

 $(OBJS): $(HEADERS)

 tls$(EXEEXT): $(TLS_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)

 getgroups$(EXEEXT): getgroups.o
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)

 getfsdev$(EXEEXT): getfsdev.o
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)

 TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
 trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)

 T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o
 t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)

 gen:
 	$(MAKE) -C $(srcdir) -f prepare-source.mak gen

 man:
 	$(MAKE) -C $(srcdir) -f prepare-source.mak man

 proto:
 	$(MAKE) -C $(srcdir) -f prepare-source.mak proto.h

 clean: cleantests
 	rm -f *~ $(OBJS) $(TLS_OBJ) $(CHECK_PROGS) $(CHECK_OBJS)

 cleantests:
 	rm -rf ./testtmp*

 # We try to delete built files from both the source and build
 # directories, just in case somebody previously configured things in
 # the source directory.
 distclean: clean
 	rm -f Makefile config.h config.status
 	rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status

 	rm -f config.cache config.log
 	rm -f $(srcdir)/config.cache $(srcdir)/config.log

 	rm -f shconfig $(srcdir)/shconfig

 # this target is really just for my use. It only works on a limited
 # range of machines and is used to produce a list of potentially
 # dead (ie. unused) functions in the code. (tridge)
 finddead:
 	nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
 	nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
 	comm -13 nmused.txt nmfns.txt

 # 'check' is the GNU name, 'test' is the name for everybody else :-)
 .PHONY: check test

 test: check


 # There seems to be no standard way to specify some variables as
 # exported from a Makefile apart from listing them like this.

 # This depends on building rsync; if we need any helper programs it
 # should depend on them too.

 # We try to run the scripts with POSIX mode on, in the hope that will
 # catch Bash-isms earlier even if we're running on GNU.  Of course, we
 # might lose in the future where POSIX diverges from old sh.

 check: all $(CHECK_PROGS)
 	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin=`pwd`/rsync$(EXEEXT) srcdir="$(srcdir)" $(srcdir)/runtests.sh

 wildtest.o: wildtest.c lib/wildmatch.c rsync.h
 wildtest$(EXEEXT): wildtest.o lib/compat.o
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o @BUILD_POPT@ $(LIBS)

 # This does *not* depend on building or installing: you can use it to
 # check a version installed from a binary or some other source tree,
 # if you want.

 installcheck: $(CHECK_PROGS)
 	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh

 # TODO: Add 'dist' target; need to know which files will be included

 # Run the SPLINT (Secure Programming Lint) tool.  <www.splint.org>
 .PHONY: splint
 splint:
 	splint +unixlib +gnuextensions -weak rsync.c


 rsync.dvi: doc/rsync.texinfo
 	texi2dvi -o $@ $<

 rsync.ps: rsync.dvi
 	dvips -ta4 -o $@ $<

 rsync.pdf: doc/rsync.texinfo
 	texi2dvi -o $@ --pdf $<


 doxygen:
 	cd $(srcdir) && rm dox/html/* && doxygen

 # for maintainers only
 doxygen-upload:
 	rsync -avzv $(srcdir)/dox/html/ --delete \
 	samba.org:/home/httpd/html/rsync/doxygen/head/
	# Makefile for rsync. This is processed by configure to produce the final
	# Makefile

	prefix=@prefix@
	exec_prefix=@exec_prefix@
	bindir=@bindir@
	mandir=@mandir@

	LIBS=@LIBS@
	CC=@CC@
	CFLAGS=@CFLAGS@
	CPPFLAGS=@CPPFLAGS@
	EXEEXT=@EXEEXT@
	LDFLAGS=@LDFLAGS@

	INSTALLCMD=@INSTALL@
	INSTALLMAN=@INSTALL@

	srcdir=@srcdir@
	VPATH=$(srcdir)
	SHELL=/bin/sh

	VERSION=@VERSION@

	.SUFFIXES:
	.SUFFIXES: .c .o

	HEADERS=byteorder.h config.h errcode.h proto.h rsync.h lib/pool_alloc.h
	LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o \
	lib/permstring.o lib/pool_alloc.o @LIBOBJS@
	ZLIBOBJ=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
	zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
	OBJS1=rsync.o generator.o receiver.o cleanup.o sender.o exclude.o util.o \
	main.o checksum.o match.o syscall.o log.o backup.o
	OBJS2=options.o flist.o io.o compat.o hlink.o token.o uidlist.o socket.o \
	fileio.o batch.o clientname.o chmod.o
	OBJS3=progress.o pipe.o
	DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
	popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
	popt/popthelp.o popt/poptparse.o
	OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) $(ZLIBOBJ) @BUILD_POPT@

	TLS_OBJ = tls.o syscall.o lib/compat.o lib/snprintf.o lib/permstring.o

	# Programs we must have to run the test cases
	CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
	trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)

	# Objects for CHECK_PROGS to clean
	CHECK_OBJS=getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o

	# note that the -I. is needed to handle config.h when using VPATH
	.c.o:
	@OBJ_SAVE@
	$(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
	@OBJ_RESTORE@

	all: rsync$(EXEEXT)

	install: all
	-mkdir -p ${DESTDIR}${bindir}
	${INSTALLCMD} ${INSTALL_STRIP} -m 755 rsync$(EXEEXT) ${DESTDIR}${bindir}
	-mkdir -p ${DESTDIR}${mandir}/man1
	-mkdir -p ${DESTDIR}${mandir}/man5
	${INSTALLMAN} -m 644 $(srcdir)/rsync.1 ${DESTDIR}${mandir}/man1
	${INSTALLMAN} -m 644 $(srcdir)/rsyncd.conf.5 ${DESTDIR}${mandir}/man5

	install-strip:
	$(MAKE) INSTALL_STRIP='-s' install

	rsync$(EXEEXT): $(OBJS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)

	$(OBJS): $(HEADERS)

	tls$(EXEEXT): $(TLS_OBJ)
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)

	getgroups$(EXEEXT): getgroups.o
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)

	getfsdev$(EXEEXT): getfsdev.o
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)

	TRIMSLASH_OBJ = trimslash.o syscall.o lib/compat.o lib/snprintf.o
	trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)

	T_UNSAFE_OBJ = t_unsafe.o syscall.o util.o t_stub.o lib/compat.o lib/snprintf.o
	t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)

	gen:
	$(MAKE) -C $(srcdir) -f prepare-source.mak gen

	man:
	$(MAKE) -C $(srcdir) -f prepare-source.mak man

	proto:
	$(MAKE) -C $(srcdir) -f prepare-source.mak proto.h

	clean: cleantests
	rm -f *~ $(OBJS) $(TLS_OBJ) $(CHECK_PROGS) $(CHECK_OBJS)

	cleantests:
	rm -rf ./testtmp*

	# We try to delete built files from both the source and build
	# directories, just in case somebody previously configured things in
	# the source directory.
	distclean: clean
	rm -f Makefile config.h config.status
	rm -f $(srcdir)/Makefile $(srcdir)/config.h $(srcdir)/config.status

	rm -f config.cache config.log
	rm -f $(srcdir)/config.cache $(srcdir)/config.log

	rm -f shconfig $(srcdir)/shconfig

	# this target is really just for my use. It only works on a limited
	# range of machines and is used to produce a list of potentially
	# dead (ie. unused) functions in the code. (tridge)
	finddead:
	nm .o /*.o \|grep 'U ' \| awk '{print $$2}' \| sort -u > nmused.txt
	nm .o /*.o \|grep 'T ' \| awk '{print $$3}' \| sort -u > nmfns.txt
	comm -13 nmused.txt nmfns.txt

	# 'check' is the GNU name, 'test' is the name for everybody else :-)
	.PHONY: check test

	test: check


	# There seems to be no standard way to specify some variables as
	# exported from a Makefile apart from listing them like this.

	# This depends on building rsync; if we need any helper programs it
	# should depend on them too.

	# We try to run the scripts with POSIX mode on, in the hope that will
	# catch Bash-isms earlier even if we're running on GNU. Of course, we
	# might lose in the future where POSIX diverges from old sh.

	check: all $(CHECK_PROGS)
	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin=`pwd`/rsync$(EXEEXT) srcdir="$(srcdir)" $(srcdir)/runtests.sh

	wildtest.o: wildtest.c lib/wildmatch.c rsync.h
	wildtest$(EXEEXT): wildtest.o lib/compat.o
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o @BUILD_POPT@ $(LIBS)

	# This does not depend on building or installing: you can use it to
	# check a version installed from a binary or some other source tree,
	# if you want.

	installcheck: $(CHECK_PROGS)
	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh

	# TODO: Add 'dist' target; need to know which files will be included

	# Run the SPLINT (Secure Programming Lint) tool. <www.splint.org>
	.PHONY: splint
	splint:
	splint +unixlib +gnuextensions -weak rsync.c


	rsync.dvi: doc/rsync.texinfo
	texi2dvi -o $@ $<

	rsync.ps: rsync.dvi
	dvips -ta4 -o $@ $<

	rsync.pdf: doc/rsync.texinfo
	texi2dvi -o $@ --pdf $<


	doxygen:
	cd $(srcdir) && rm dox/html/* && doxygen

	# for maintainers only
	doxygen-upload:
	rsync -avzv $(srcdir)/dox/html/ --delete \
	samba.org:/home/httpd/html/rsync/doxygen/head/