Makefile.in - external_rsync - Gitiles

 # The Makefile for rsync (configure creates it from Makefile.in).

 prefix=@prefix@
 datarootdir=@datarootdir@
 exec_prefix=@exec_prefix@
 bindir=@bindir@
 libdir=@libdir@/rsync
 mandir=@mandir@
 with_rrsync=@with_rrsync@

 LIBS=@LIBS@
 CC=@CC@
 AWK=@AWK@
 CFLAGS=@CFLAGS@
 CPPFLAGS=@CPPFLAGS@
 CXX=@CXX@
 CXXFLAGS=@CXXFLAGS@
 EXEEXT=@EXEEXT@
 LDFLAGS=@LDFLAGS@
 LIBOBJDIR=lib/

 INSTALLCMD=@INSTALL@
 INSTALLMAN=@INSTALL@

 srcdir=@srcdir@
 MKDIR_P=@MKDIR_P@
 VPATH=$(srcdir)
 SHELL=/bin/sh

 .SUFFIXES:
 .SUFFIXES: .c .o

 ROLL_SIMD_x86_64=simd-checksum-x86_64.o
 ROLL_ASM_x86_64=simd-checksum-avx2.o
 MD5_ASM_x86_64=lib/md5-asm-x86_64.o

 GENFILES=configure.sh aclocal.m4 config.h.in rsync.1 rsync.1.html \
 	 rsync-ssl.1 rsync-ssl.1.html rsyncd.conf.5 rsyncd.conf.5.html \
 	 @GEN_RRSYNC@
 HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h itypes.h inums.h \
 	lib/pool_alloc.h lib/mdigest.h lib/md-defines.h
 LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
 	lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
 zlib_OBJS=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
 	zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
 OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
 	util1.o util2.o main.o checksum.o match.o syscall.o log.o backup.o delete.o
 OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
 	usage.o fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
 OBJS3=progress.o pipe.o @MD5_ASM@ @ROLL_SIMD@ @ROLL_ASM@
 DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
 popt_OBJS=popt/findme.o  popt/popt.o  popt/poptconfig.o \
 	popt/popthelp.o popt/poptparse.o
 OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) @BUILD_ZLIB@ @BUILD_POPT@

 TLS_OBJ = tls.o syscall.o util2.o t_stub.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o @BUILD_POPT@

 # Programs we must have to run the test cases
 CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
 	testrun$(EXEEXT) trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)

 CHECK_SYMLINKS = testsuite/chown-fake.test testsuite/devices-fake.test testsuite/xattrs-hlink.test

 # Objects for CHECK_PROGS to clean
 CHECK_OBJS=tls.o testrun.o getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o

 # note that the -I. is needed to handle config.h when using VPATH
 .c.o:
 @OBJ_SAVE@
 	$(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
 @OBJ_RESTORE@

 # NOTE: consider running "packaging/smart-make" instead of "make" to auto-handle
 # any changes to configure.sh and the main Makefile prior to a "make all".
 all: Makefile rsync$(EXEEXT) stunnel-rsyncd.conf @MAKE_RRSYNC@ @MAKE_MAN@
 .PHONY: all

 .PHONY: install
 install: all
 	-$(MKDIR_P) $(DESTDIR)$(bindir)
 	$(INSTALLCMD) $(INSTALL_STRIP) -m 755 rsync$(EXEEXT) $(DESTDIR)$(bindir)
 	$(INSTALLCMD) -m 755 $(srcdir)/rsync-ssl $(DESTDIR)$(bindir)
 	-$(MKDIR_P) $(DESTDIR)$(mandir)/man1
 	-$(MKDIR_P) $(DESTDIR)$(mandir)/man5
 	if test -f rsync.1; then $(INSTALLMAN) -m 644 rsync.1 $(DESTDIR)$(mandir)/man1; fi
 	if test -f rsync-ssl.1; then $(INSTALLMAN) -m 644 rsync-ssl.1 $(DESTDIR)$(mandir)/man1; fi
 	if test -f rsyncd.conf.5; then $(INSTALLMAN) -m 644 rsyncd.conf.5 $(DESTDIR)$(mandir)/man5; fi
 	if test "$(with_rrsync)" = yes; then \
 	    $(INSTALLCMD) -m 755 rrsync $(DESTDIR)$(bindir); \
 	    if test -f rrsync.1; then $(INSTALLMAN) -m 644 rrsync.1 $(DESTDIR)$(mandir)/man1; fi; \
 	fi

 install-ssl-daemon: stunnel-rsyncd.conf
 	-$(MKDIR_P) $(DESTDIR)/etc/stunnel
 	$(INSTALLCMD) -m 644 stunnel-rsyncd.conf $(DESTDIR)/etc/stunnel/rsyncd.conf
 	@if ! ls /etc/rsync-ssl/certs/server.* >/dev/null 2>/dev/null; then \
 	    echo "Note that you'll need to install the certificate used by /etc/stunnel/rsyncd.conf"; \
 	fi

 install-all: install install-ssl-daemon

 install-strip:
 	$(MAKE) INSTALL_STRIP='-s' install

 rsync$(EXEEXT): $(OBJS)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)

 rrsync: support/rrsync
 	cp -p $(srcdir)/support/rrsync rrsync

 $(OBJS): $(HEADERS)
 $(CHECK_OBJS): $(HEADERS)
 tls.o xattrs.o: lib/sysxattrs.h
 usage.o: version.h latest-year.h help-rsync.h help-rsyncd.h git-version.h default-cvsignore.h
 loadparm.o: default-dont-compress.h daemon-parm.h

 flist.o: rounding.h

 default-cvsignore.h default-dont-compress.h: rsync.1.md define-from-md.awk
 	$(AWK) -f $(srcdir)/define-from-md.awk -v hfile=$@ $(srcdir)/rsync.1.md

 help-rsync.h help-rsyncd.h: rsync.1.md help-from-md.awk
 	$(AWK) -f $(srcdir)/help-from-md.awk -v hfile=$@ $(srcdir)/rsync.1.md

 daemon-parm.h: daemon-parm.txt daemon-parm.awk
 	$(AWK) -f $(srcdir)/daemon-parm.awk $(srcdir)/daemon-parm.txt

 rounding.h: rounding.c rsync.h proto.h
 	@for r in 0 1 3; do \
 	    if $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >rounding.out 2>&1; then \
 		echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
 		if test -f "$$HOME/build_farm/build_test.fns"; then \
 		    echo "EXTRA_ROUNDING is $$r" >&2; \
 		fi; \
 		break; \
 	    fi; \
 	done
 	@rm -f rounding
 	@if test -f rounding.h; then : ; else \
 	    cat rounding.out 1>&2; \
 	    echo "Failed to create rounding.h!" 1>&2; \
 	    exit 1; \
 	fi
 	@rm -f rounding.out

 git-version.h: ALWAYS_RUN
 	$(srcdir)/mkgitver

 .PHONY: ALWAYS_RUN
 ALWAYS_RUN:

 simd-checksum-x86_64.o: simd-checksum-x86_64.cpp
 	@$(srcdir)/cmd-or-msg disable-roll-simd $(CXX) -I. $(CXXFLAGS) $(CPPFLAGS) -c -o $@ $(srcdir)/simd-checksum-x86_64.cpp

 simd-checksum-avx2.o: simd-checksum-avx2.S
 	@$(srcdir)/cmd-or-msg disable-roll-asm $(CC) $(CFLAGS) -I. @NOEXECSTACK@ -c -o $@ $(srcdir)/simd-checksum-avx2.S

 lib/md5-asm-x86_64.o: lib/md5-asm-x86_64.S lib/md-defines.h
 	@$(srcdir)/cmd-or-msg disable-md5-asm $(CC) -I. @NOEXECSTACK@ -c -o $@ $(srcdir)/lib/md5-asm-x86_64.S

 tls$(EXEEXT): $(TLS_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)

 testrun$(EXEEXT): testrun.o
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ testrun.o

 getgroups$(EXEEXT): getgroups.o
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)

 getfsdev$(EXEEXT): getfsdev.o
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)

 TRIMSLASH_OBJ = trimslash.o syscall.o util2.o t_stub.o lib/compat.o lib/snprintf.o
 trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)

 T_UNSAFE_OBJ = t_unsafe.o syscall.o util1.o util2.o t_stub.o lib/compat.o lib/snprintf.o lib/wildmatch.o
 t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)

 .PHONY: conf
 conf: configure.sh config.h.in

 .PHONY: gen
 gen: conf proto.h man git-version.h

 .PHONY: gensend
 gensend: gen
 	if ! diff git-version.h $(srcdir)/gists/rsync-git-version.h >/dev/null; then \
 	    ./rsync -ai git-version.h $(srcdir)/gists/rsync-git-version.h && \
 	    (cd $(srcdir)/gists && git commit --allow-empty-message -m '' rsync-git-version.h && git push) ; \
 	fi
 	rsync -aic $(GENFILES) git-version.h $${SAMBA_HOST-samba.org}:/home/ftp/pub/rsync/generated-files/ || true

 aclocal.m4: $(srcdir)/m4/*.m4
 	aclocal -I $(srcdir)/m4

 configure.sh config.h.in: configure.ac aclocal.m4
 	@if test -f configure.sh; then cp -p configure.sh configure.sh.old; else touch configure.sh.old; fi
 	@if test -f config.h.in; then cp -p config.h.in config.h.in.old; else touch config.h.in.old; fi
 	autoconf -o configure.sh
 	autoheader && touch config.h.in
 	@if diff configure.sh configure.sh.old >/dev/null 2>&1; then \
 	    echo "configure.sh is unchanged."; \
 	    rm configure.sh.old; \
 	else \
 	    echo "configure.sh has CHANGED."; \
 	fi
 	@if diff config.h.in config.h.in.old >/dev/null 2>&1; then \
 	    echo "config.h.in is unchanged."; \
 	    rm config.h.in.old; \
 	else \
 	    echo "config.h.in has CHANGED."; \
 	fi
 	@if test -f configure.sh.old || test -f config.h.in.old; then \
 	    if test "$(MAKECMDGOALS)" = reconfigure; then \
 		echo 'Continuing with "make reconfigure".'; \
 	    else \
 		echo 'You may need to run:'; \
 		echo '  make reconfigure'; \
 		exit 1; \
 	    fi \
 	fi

 .PHONY: reconfigure
 reconfigure: configure.sh
 	./config.status --recheck
 	./config.status

 .PHONY: restatus
 restatus:
 	./config.status

 Makefile: Makefile.in config.status configure.sh config.h.in
 	@if test -f Makefile; then cp -p Makefile Makefile.old; else touch Makefile.old; fi
 	@./config.status
 	@if diff Makefile Makefile.old >/dev/null 2>&1; then \
 	    echo "Makefile is unchanged."; \
 	    rm Makefile.old; \
 	else \
 	    if test "$(MAKECMDGOALS)" = reconfigure; then \
 		echo 'Continuing with "make reconfigure".'; \
 	    else \
 		echo "Makefile updated -- rerun your make command."; \
 		exit 1; \
 	    fi \
 	fi

 stunnel-rsyncd.conf: $(srcdir)/stunnel-rsyncd.conf.in Makefile
 	sed 's;\@bindir\@;$(bindir);g' <$(srcdir)/stunnel-rsyncd.conf.in >stunnel-rsyncd.conf

 .PHONY: proto
 proto: proto.h-tstamp

 proto.h: proto.h-tstamp
 	@if test -f proto.h; then :; else cp -p $(srcdir)/proto.h .; fi

 proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c daemon-parm.h
 	$(AWK) -f $(srcdir)/mkproto.awk $(srcdir)/*.c $(srcdir)/lib/compat.c daemon-parm.h

 .PHONY: man
 man: rsync.1 rsync-ssl.1 rsyncd.conf.5 @MAKE_RRSYNC_1@

 rsync.1: rsync.1.md md-convert version.h Makefile
 	@$(srcdir)/maybe-make-man rsync.1.md

 rsync-ssl.1: rsync-ssl.1.md md-convert version.h Makefile
 	@$(srcdir)/maybe-make-man rsync-ssl.1.md

 rsyncd.conf.5: rsyncd.conf.5.md md-convert version.h Makefile
 	@$(srcdir)/maybe-make-man rsyncd.conf.5.md

 rrsync.1: support/rrsync.1.md md-convert Makefile
 	@$(srcdir)/maybe-make-man support/rrsync.1.md

 .PHONY: clean
 clean: cleantests
 	rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) @MAKE_RRSYNC@ \
 		git-version.h rounding rounding.h *.old rsync*.1 rsync*.5 @MAKE_RRSYNC_1@ \
 		*.html daemon-parm.h help-*.h default-*.h proto.h proto.h-tstamp

 .PHONY: cleantests
 cleantests:
 	rm -rf ./testtmp*

 # We try to delete built files from both the source and build
 # directories, just in case somebody previously configured things in
 # the source directory.
 .PHONY: distclean
 distclean: clean
 	for dir in $(srcdir) . ; do \
 	    (cd "$$dir" && rm -rf Makefile config.h config.status stunnel-rsyncd.conf \
 	     lib/dummy popt/dummy zlib/dummy config.cache config.log shconfig \
 	     $(GENFILES) autom4te.cache) ; \
 	done

 # this target is really just for my use. It only works on a limited
 # range of machines and is used to produce a list of potentially
 # dead (ie. unused) functions in the code. (tridge)
 .PHONY: finddead
 finddead:
 	nm *.o */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
 	nm *.o */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
 	comm -13 nmused.txt nmfns.txt
 	@rm nmused.txt nmfns.txt

 # 'check' is the GNU name, 'test' is the name for everybody else :-)
 .PHONY: test
 test: check

 # There seems to be no standard way to specify some variables as
 # exported from a Makefile apart from listing them like this.

 # This depends on building rsync; if we need any helper programs it
 # should depend on them too.

 # We try to run the scripts with POSIX mode on, in the hope that will
 # catch Bash-isms earlier even if we're running on GNU.  Of course, we
 # might lose in the future where POSIX diverges from old sh.

 .PHONY: check
 check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
 	rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh

 .PHONY: check29
 check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
 	rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29

 .PHONY: check30
 check30: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
 	rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=30

 wildtest.o: wildtest.c t_stub.o lib/wildmatch.c rsync.h config.h
 wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
 	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)

 testsuite/chown-fake.test:
 	ln -s chown.test $(srcdir)/testsuite/chown-fake.test

 testsuite/devices-fake.test:
 	ln -s devices.test $(srcdir)/testsuite/devices-fake.test

 testsuite/xattrs-hlink.test:
 	ln -s xattrs.test $(srcdir)/testsuite/xattrs-hlink.test

 # This does *not* depend on building or installing: you can use it to
 # check a version installed from a binary or some other source tree,
 # if you want.

 .PHONY: installcheck
 installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
 	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh

 # TODO: Add 'dist' target; need to know which files will be included

 # Run the SPLINT (Secure Programming Lint) tool.  <www.splint.org>
 .PHONY: splint
 splint:
 	splint +unixlib +gnuextensions -weak rsync.c

 .PHONY: doxygen
 doxygen:
 	cd $(srcdir) && rm dox/html/* && doxygen

 # for maintainers only
 .PHONY: doxygen-upload
 doxygen-upload:
 	rsync -avzv $(srcdir)/dox/html/ --delete \
 	$${SAMBA_HOST-samba.org}:/home/httpd/html/rsync/doxygen/head/
	# The Makefile for rsync (configure creates it from Makefile.in).

	prefix=@prefix@
	datarootdir=@datarootdir@
	exec_prefix=@exec_prefix@
	bindir=@bindir@
	libdir=@libdir@/rsync
	mandir=@mandir@
	with_rrsync=@with_rrsync@

	LIBS=@LIBS@
	CC=@CC@
	AWK=@AWK@
	CFLAGS=@CFLAGS@
	CPPFLAGS=@CPPFLAGS@
	CXX=@CXX@
	CXXFLAGS=@CXXFLAGS@
	EXEEXT=@EXEEXT@
	LDFLAGS=@LDFLAGS@
	LIBOBJDIR=lib/

	INSTALLCMD=@INSTALL@
	INSTALLMAN=@INSTALL@

	srcdir=@srcdir@
	MKDIR_P=@MKDIR_P@
	VPATH=$(srcdir)
	SHELL=/bin/sh

	.SUFFIXES:
	.SUFFIXES: .c .o

	ROLL_SIMD_x86_64=simd-checksum-x86_64.o
	ROLL_ASM_x86_64=simd-checksum-avx2.o
	MD5_ASM_x86_64=lib/md5-asm-x86_64.o

	GENFILES=configure.sh aclocal.m4 config.h.in rsync.1 rsync.1.html \
	rsync-ssl.1 rsync-ssl.1.html rsyncd.conf.5 rsyncd.conf.5.html \
	@GEN_RRSYNC@
	HEADERS=byteorder.h config.h errcode.h proto.h rsync.h ifuncs.h itypes.h inums.h \
	lib/pool_alloc.h lib/mdigest.h lib/md-defines.h
	LIBOBJ=lib/wildmatch.o lib/compat.o lib/snprintf.o lib/mdfour.o lib/md5.o \
	lib/permstring.o lib/pool_alloc.o lib/sysacls.o lib/sysxattrs.o @LIBOBJS@
	zlib_OBJS=zlib/deflate.o zlib/inffast.o zlib/inflate.o zlib/inftrees.o \
	zlib/trees.o zlib/zutil.o zlib/adler32.o zlib/compress.o zlib/crc32.o
	OBJS1=flist.o rsync.o generator.o receiver.o cleanup.o sender.o exclude.o \
	util1.o util2.o main.o checksum.o match.o syscall.o log.o backup.o delete.o
	OBJS2=options.o io.o compat.o hlink.o token.o uidlist.o socket.o hashtable.o \
	usage.o fileio.o batch.o clientname.o chmod.o acls.o xattrs.o
	OBJS3=progress.o pipe.o @MD5_ASM@ @ROLL_SIMD@ @ROLL_ASM@
	DAEMON_OBJ = params.o loadparm.o clientserver.o access.o connection.o authenticate.o
	popt_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
	popt/popthelp.o popt/poptparse.o
	OBJS=$(OBJS1) $(OBJS2) $(OBJS3) $(DAEMON_OBJ) $(LIBOBJ) @BUILD_ZLIB@ @BUILD_POPT@

	TLS_OBJ = tls.o syscall.o util2.o t_stub.o lib/compat.o lib/snprintf.o lib/permstring.o lib/sysxattrs.o @BUILD_POPT@

	# Programs we must have to run the test cases
	CHECK_PROGS = rsync$(EXEEXT) tls$(EXEEXT) getgroups$(EXEEXT) getfsdev$(EXEEXT) \
	testrun$(EXEEXT) trimslash$(EXEEXT) t_unsafe$(EXEEXT) wildtest$(EXEEXT)

	CHECK_SYMLINKS = testsuite/chown-fake.test testsuite/devices-fake.test testsuite/xattrs-hlink.test

	# Objects for CHECK_PROGS to clean
	CHECK_OBJS=tls.o testrun.o getgroups.o getfsdev.o t_stub.o t_unsafe.o trimslash.o wildtest.o

	# note that the -I. is needed to handle config.h when using VPATH
	.c.o:
	@OBJ_SAVE@
	$(CC) -I. -I$(srcdir) $(CFLAGS) $(CPPFLAGS) -c $< @CC_SHOBJ_FLAG@
	@OBJ_RESTORE@

	# NOTE: consider running "packaging/smart-make" instead of "make" to auto-handle
	# any changes to configure.sh and the main Makefile prior to a "make all".
	all: Makefile rsync$(EXEEXT) stunnel-rsyncd.conf @MAKE_RRSYNC@ @MAKE_MAN@
	.PHONY: all

	.PHONY: install
	install: all
	-$(MKDIR_P) $(DESTDIR)$(bindir)
	$(INSTALLCMD) $(INSTALL_STRIP) -m 755 rsync$(EXEEXT) $(DESTDIR)$(bindir)
	$(INSTALLCMD) -m 755 $(srcdir)/rsync-ssl $(DESTDIR)$(bindir)
	-$(MKDIR_P) $(DESTDIR)$(mandir)/man1
	-$(MKDIR_P) $(DESTDIR)$(mandir)/man5
	if test -f rsync.1; then $(INSTALLMAN) -m 644 rsync.1 $(DESTDIR)$(mandir)/man1; fi
	if test -f rsync-ssl.1; then $(INSTALLMAN) -m 644 rsync-ssl.1 $(DESTDIR)$(mandir)/man1; fi
	if test -f rsyncd.conf.5; then $(INSTALLMAN) -m 644 rsyncd.conf.5 $(DESTDIR)$(mandir)/man5; fi
	if test "$(with_rrsync)" = yes; then \
	$(INSTALLCMD) -m 755 rrsync $(DESTDIR)$(bindir); \
	if test -f rrsync.1; then $(INSTALLMAN) -m 644 rrsync.1 $(DESTDIR)$(mandir)/man1; fi; \
	fi

	install-ssl-daemon: stunnel-rsyncd.conf
	-$(MKDIR_P) $(DESTDIR)/etc/stunnel
	$(INSTALLCMD) -m 644 stunnel-rsyncd.conf $(DESTDIR)/etc/stunnel/rsyncd.conf
	@if ! ls /etc/rsync-ssl/certs/server.* >/dev/null 2>/dev/null; then \
	echo "Note that you'll need to install the certificate used by /etc/stunnel/rsyncd.conf"; \
	fi

	install-all: install install-ssl-daemon

	install-strip:
	$(MAKE) INSTALL_STRIP='-s' install

	rsync$(EXEEXT): $(OBJS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)

	rrsync: support/rrsync
	cp -p $(srcdir)/support/rrsync rrsync

	$(OBJS): $(HEADERS)
	$(CHECK_OBJS): $(HEADERS)
	tls.o xattrs.o: lib/sysxattrs.h
	usage.o: version.h latest-year.h help-rsync.h help-rsyncd.h git-version.h default-cvsignore.h
	loadparm.o: default-dont-compress.h daemon-parm.h

	flist.o: rounding.h

	default-cvsignore.h default-dont-compress.h: rsync.1.md define-from-md.awk
	$(AWK) -f $(srcdir)/define-from-md.awk -v hfile=$@ $(srcdir)/rsync.1.md

	help-rsync.h help-rsyncd.h: rsync.1.md help-from-md.awk
	$(AWK) -f $(srcdir)/help-from-md.awk -v hfile=$@ $(srcdir)/rsync.1.md

	daemon-parm.h: daemon-parm.txt daemon-parm.awk
	$(AWK) -f $(srcdir)/daemon-parm.awk $(srcdir)/daemon-parm.txt

	rounding.h: rounding.c rsync.h proto.h
	@for r in 0 1 3; do \
	if $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) -o rounding -DEXTRA_ROUNDING=$$r -I. $(srcdir)/rounding.c >rounding.out 2>&1; then \
	echo "#define EXTRA_ROUNDING $$r" >rounding.h; \
	if test -f "$$HOME/build_farm/build_test.fns"; then \
	echo "EXTRA_ROUNDING is $$r" >&2; \
	fi; \
	break; \
	fi; \
	done
	@rm -f rounding
	@if test -f rounding.h; then : ; else \
	cat rounding.out 1>&2; \
	echo "Failed to create rounding.h!" 1>&2; \
	exit 1; \
	fi
	@rm -f rounding.out

	git-version.h: ALWAYS_RUN
	$(srcdir)/mkgitver

	.PHONY: ALWAYS_RUN
	ALWAYS_RUN:

	simd-checksum-x86_64.o: simd-checksum-x86_64.cpp
	@$(srcdir)/cmd-or-msg disable-roll-simd $(CXX) -I. $(CXXFLAGS) $(CPPFLAGS) -c -o $@ $(srcdir)/simd-checksum-x86_64.cpp

	simd-checksum-avx2.o: simd-checksum-avx2.S
	@$(srcdir)/cmd-or-msg disable-roll-asm $(CC) $(CFLAGS) -I. @NOEXECSTACK@ -c -o $@ $(srcdir)/simd-checksum-avx2.S

	lib/md5-asm-x86_64.o: lib/md5-asm-x86_64.S lib/md-defines.h
	@$(srcdir)/cmd-or-msg disable-md5-asm $(CC) -I. @NOEXECSTACK@ -c -o $@ $(srcdir)/lib/md5-asm-x86_64.S

	tls$(EXEEXT): $(TLS_OBJ)
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TLS_OBJ) $(LIBS)

	testrun$(EXEEXT): testrun.o
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ testrun.o

	getgroups$(EXEEXT): getgroups.o
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getgroups.o $(LIBS)

	getfsdev$(EXEEXT): getfsdev.o
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ getfsdev.o $(LIBS)

	TRIMSLASH_OBJ = trimslash.o syscall.o util2.o t_stub.o lib/compat.o lib/snprintf.o
	trimslash$(EXEEXT): $(TRIMSLASH_OBJ)
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(TRIMSLASH_OBJ) $(LIBS)

	T_UNSAFE_OBJ = t_unsafe.o syscall.o util1.o util2.o t_stub.o lib/compat.o lib/snprintf.o lib/wildmatch.o
	t_unsafe$(EXEEXT): $(T_UNSAFE_OBJ)
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(T_UNSAFE_OBJ) $(LIBS)

	.PHONY: conf
	conf: configure.sh config.h.in

	.PHONY: gen
	gen: conf proto.h man git-version.h

	.PHONY: gensend
	gensend: gen
	if ! diff git-version.h $(srcdir)/gists/rsync-git-version.h >/dev/null; then \
	./rsync -ai git-version.h $(srcdir)/gists/rsync-git-version.h && \
	(cd $(srcdir)/gists && git commit --allow-empty-message -m '' rsync-git-version.h && git push) ; \
	fi
	rsync -aic $(GENFILES) git-version.h $${SAMBA_HOST-samba.org}:/home/ftp/pub/rsync/generated-files/ \|\| true

	aclocal.m4: $(srcdir)/m4/*.m4
	aclocal -I $(srcdir)/m4

	configure.sh config.h.in: configure.ac aclocal.m4
	@if test -f configure.sh; then cp -p configure.sh configure.sh.old; else touch configure.sh.old; fi
	@if test -f config.h.in; then cp -p config.h.in config.h.in.old; else touch config.h.in.old; fi
	autoconf -o configure.sh
	autoheader && touch config.h.in
	@if diff configure.sh configure.sh.old >/dev/null 2>&1; then \
	echo "configure.sh is unchanged."; \
	rm configure.sh.old; \
	else \
	echo "configure.sh has CHANGED."; \
	fi
	@if diff config.h.in config.h.in.old >/dev/null 2>&1; then \
	echo "config.h.in is unchanged."; \
	rm config.h.in.old; \
	else \
	echo "config.h.in has CHANGED."; \
	fi
	@if test -f configure.sh.old \|\| test -f config.h.in.old; then \
	if test "$(MAKECMDGOALS)" = reconfigure; then \
	echo 'Continuing with "make reconfigure".'; \
	else \
	echo 'You may need to run:'; \
	echo ' make reconfigure'; \
	exit 1; \
	fi \
	fi

	.PHONY: reconfigure
	reconfigure: configure.sh
	./config.status --recheck
	./config.status

	.PHONY: restatus
	restatus:
	./config.status

	Makefile: Makefile.in config.status configure.sh config.h.in
	@if test -f Makefile; then cp -p Makefile Makefile.old; else touch Makefile.old; fi
	@./config.status
	@if diff Makefile Makefile.old >/dev/null 2>&1; then \
	echo "Makefile is unchanged."; \
	rm Makefile.old; \
	else \
	if test "$(MAKECMDGOALS)" = reconfigure; then \
	echo 'Continuing with "make reconfigure".'; \
	else \
	echo "Makefile updated -- rerun your make command."; \
	exit 1; \
	fi \
	fi

	stunnel-rsyncd.conf: $(srcdir)/stunnel-rsyncd.conf.in Makefile
	sed 's;\@bindir\@;$(bindir);g' <$(srcdir)/stunnel-rsyncd.conf.in >stunnel-rsyncd.conf

	.PHONY: proto
	proto: proto.h-tstamp

	proto.h: proto.h-tstamp
	@if test -f proto.h; then :; else cp -p $(srcdir)/proto.h .; fi

	proto.h-tstamp: $(srcdir)/*.c $(srcdir)/lib/compat.c daemon-parm.h
	$(AWK) -f $(srcdir)/mkproto.awk $(srcdir)/*.c $(srcdir)/lib/compat.c daemon-parm.h

	.PHONY: man
	man: rsync.1 rsync-ssl.1 rsyncd.conf.5 @MAKE_RRSYNC_1@

	rsync.1: rsync.1.md md-convert version.h Makefile
	@$(srcdir)/maybe-make-man rsync.1.md

	rsync-ssl.1: rsync-ssl.1.md md-convert version.h Makefile
	@$(srcdir)/maybe-make-man rsync-ssl.1.md

	rsyncd.conf.5: rsyncd.conf.5.md md-convert version.h Makefile
	@$(srcdir)/maybe-make-man rsyncd.conf.5.md

	rrsync.1: support/rrsync.1.md md-convert Makefile
	@$(srcdir)/maybe-make-man support/rrsync.1.md

	.PHONY: clean
	clean: cleantests
	rm -f *~ $(OBJS) $(CHECK_PROGS) $(CHECK_OBJS) $(CHECK_SYMLINKS) @MAKE_RRSYNC@ \
	git-version.h rounding rounding.h .old rsync.1 rsync*.5 @MAKE_RRSYNC_1@ \
	.html daemon-parm.h help-.h default-*.h proto.h proto.h-tstamp

	.PHONY: cleantests
	cleantests:
	rm -rf ./testtmp*

	# We try to delete built files from both the source and build
	# directories, just in case somebody previously configured things in
	# the source directory.
	.PHONY: distclean
	distclean: clean
	for dir in $(srcdir) . ; do \
	(cd "$$dir" && rm -rf Makefile config.h config.status stunnel-rsyncd.conf \
	lib/dummy popt/dummy zlib/dummy config.cache config.log shconfig \
	$(GENFILES) autom4te.cache) ; \
	done

	# this target is really just for my use. It only works on a limited
	# range of machines and is used to produce a list of potentially
	# dead (ie. unused) functions in the code. (tridge)
	.PHONY: finddead
	finddead:
	nm .o /*.o \|grep 'U ' \| awk '{print $$2}' \| sort -u > nmused.txt
	nm .o /*.o \|grep 'T ' \| awk '{print $$3}' \| sort -u > nmfns.txt
	comm -13 nmused.txt nmfns.txt
	@rm nmused.txt nmfns.txt

	# 'check' is the GNU name, 'test' is the name for everybody else :-)
	.PHONY: test
	test: check

	# There seems to be no standard way to specify some variables as
	# exported from a Makefile apart from listing them like this.

	# This depends on building rsync; if we need any helper programs it
	# should depend on them too.

	# We try to run the scripts with POSIX mode on, in the hope that will
	# catch Bash-isms earlier even if we're running on GNU. Of course, we
	# might lose in the future where POSIX diverges from old sh.

	.PHONY: check
	check: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
	rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh

	.PHONY: check29
	check29: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
	rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=29

	.PHONY: check30
	check30: all $(CHECK_PROGS) $(CHECK_SYMLINKS)
	rsync_bin=`pwd`/rsync$(EXEEXT) $(srcdir)/runtests.sh --protocol=30

	wildtest.o: wildtest.c t_stub.o lib/wildmatch.c rsync.h config.h
	wildtest$(EXEEXT): wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@
	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ wildtest.o lib/compat.o lib/snprintf.o @BUILD_POPT@ $(LIBS)

	testsuite/chown-fake.test:
	ln -s chown.test $(srcdir)/testsuite/chown-fake.test

	testsuite/devices-fake.test:
	ln -s devices.test $(srcdir)/testsuite/devices-fake.test

	testsuite/xattrs-hlink.test:
	ln -s xattrs.test $(srcdir)/testsuite/xattrs-hlink.test

	# This does not depend on building or installing: you can use it to
	# check a version installed from a binary or some other source tree,
	# if you want.

	.PHONY: installcheck
	installcheck: $(CHECK_PROGS) $(CHECK_SYMLINKS)
	POSIXLY_CORRECT=1 TOOLDIR=`pwd` rsync_bin="$(bindir)/rsync$(EXEEXT)" srcdir="$(srcdir)" $(srcdir)/runtests.sh

	# TODO: Add 'dist' target; need to know which files will be included

	# Run the SPLINT (Secure Programming Lint) tool. <www.splint.org>
	.PHONY: splint
	splint:
	splint +unixlib +gnuextensions -weak rsync.c

	.PHONY: doxygen
	doxygen:
	cd $(srcdir) && rm dox/html/* && doxygen

	# for maintainers only
	.PHONY: doxygen-upload
	doxygen-upload:
	rsync -avzv $(srcdir)/dox/html/ --delete \
	$${SAMBA_HOST-samba.org}:/home/httpd/html/rsync/doxygen/head/